|
||||
Cadillac
CTS V
|
||||
Submitted by: StealthV |
||||
Step 1. Safely raise and support the Cadillac CTS V. Step 2. Underneath the driver's side of the transmission, locate the CAGS harness which is near the "Use Dextron III ATF Only" orange sticker. The factory CAGS harness has two wires - one is gray and the other is pink with a black stripe. Step 3. On the factory CAGS Eliminator harness male plug, lift up on the little clip (circled in green) by hand and disconnect the connector.
Step 4. Simply plug in the !CAGS Eliminator in between the two factory connectors. Step 5. Safely lower the CTS-V and enjoy your new found shifting freedom! |
||||
This area is intended for Tech Tips submitted by members of LincolnvsCadillac.com. The opinions expressed here are the opinions of the individual author and do not necessarily represent the views of LincolnvsCadillac.com. Undertake these procedures at your own risk. If you have any comments or questions please contact the individual authors. Reader assumes all the risk associated with the installation of aftermarket products. LincolnvsCadillac.com and its owners are not responsible for any direct or indirect damage to the vehicle, person or persons and the resulting costs incurred from the installation or use of these products. LincolnvsCadillac.com recognizes that "Cadillac" and "Chevrolet" and their respective logos, model names and numbers are registered trademarks of the General Motors Corporation. These and other terms used on this website are used for identification purposes only. Lincolnvscadillac.com is not affiliated in any way with the General Motors Corporation, Cadillac, Chevrolet, Mobil or any other website or company listed herein. |
||||