Search results for query: LED Bulbs

...color that works on them. I don't feel like going into detail at the moment but it's a whole project using SMD LEDs, through-hole LEDs, and LED bulbs to varying degrees with varying success and varying longevity. Anothe project waiting for me to revamp it when I get a spare 2 months or something.

I hope people still follow this. I have a 2005 Lincoln LS. I found the REM and there are multiple white wires with a blue stripe. Is there a wiring diagram for the REM I could use to make sure I'm tapping into the correct one for the back up camera?

There is no switched positive power for the headlights. You would need to add a relay. The ground side of the headlight bulbs is switched on or off to turn the headlights on or off.

Prior to replacing my '93 halogen housing with '96 HID housings, I found the best results were with the Sylvania Silver Stars in the low beams and a set of modified HIR bulbs in the high beams both with relays wired in for direct battery voltage.

Luckily my housings aren't that bad and I think they'll last for another while before I refurbish them or buy a new pair. NoLimit do the bulbs fit the original get 1 housings without any modification to the housing? If they do ill snag them and the relay harness in the future and plug them in...

There are clear housings on eBay for sale. I think Jay has them. I'm on my second HID kit in 13 years. Kensun 9005 with 6K bulbs Housings on eBay HID relay harness <----- you will need this to prevent any flickering. I have 2 kits installed for highs and lows. I have absolutely no problem...

Interesting on how it’s all disappointing based on the housing reflectors. From what I’ve read is that even today’s LEDs aren’t meant to work well with the “older” cars that used halogens in the first place just because of how the whole light emittence is engineered. That being said would it...

DDM tuning? been there done that and had one bad bulb/ballast after another. Tried the more expensive Morimoto HID bulbs, again not impressed with no light situations. Of course this is Gen II but the quality of what's out there in questionable "upgrade" is not good after many, many hours...

Hi all I know that the headlight brightness of Gen 1 mark 8s are a known issue. With my new for me car I’ve been looking at options on actually being able to see the road at night. My car currently has some garbage yellow halogens. My lenses are ok and the chrome is not looking the best but...

I use the same bulb for low beam and high beam. These bulbs are 3 wire plugs as seen in the picture. The connector tab near the table is ground. The tab facing toward the bulb is low beam. the tab facing up is high beam. Use only the low beam tab in both your low beam and high beam ports if you...

I use the same bulb for low beam and high beam. These bulbs are 3 wire plugs as seen in the picture. The connector tab near the table is ground. The tab facing toward the bulb is low beam. the tab facing up is high beam. Use only the low beam tab in both your low beam and high beam ports if you...

Please tell us what bulbs you used ! Sonny

Here is how to get the 9003's into the High beam 9005 sockets. First remove the black 9005 plastic retainer. Clip out the nub pictured and scrape it smooth for no protrusion. A 1" hole saw will open the 9005 port out for the 9003 but in order to do rhis you need to use the saw to cut out a wood...

After a dozen different tested China bulbs of various types, I'm thinking this is about as good as its ever going to be with latest/greatest refit projectors. https://www.lincolnvscadillac.com/forum/ams/gen-2-led-headlight-bulbs-low-high.110/

The latest , greatest low beam and high beam LED mod is here. I'v been threw the mill testing and modifying. This mod finaly brings the Gen 2 up to snuff with the latest LED's mods. https://www.lincolnvscadillac.com/forum/ams/gen-2-led-headlight-bulbs-low-high.110/

After I wrote the above article, I found a lumens monitor I have. With some testing I found the 34w low beam of the 9003 small diameter projector was the top performer with 24-25K Lm @ 6 feet away. The 6 sided non projector I have in the high beam spot now only produces 15K Lm at 23w. You can...

Wow what a nightmare! Is it possible to get the kit Ford used a long time ago and get housings that fit normal halogen bulbs?

That makes sense. I do have HID headlights. They work pretty well. The led fog light and headlight bulbs helped quite a bit also.

As an afterthought... Is that bulb brighter than the rest? Some bulbs will fit in sockets that are designed for other types of bulbs. Last thought. When you replaced the original socket, are you sure you wired it properly? Aftermarket sockets typically have red and black wires (with possibly...