Search results for query: *

theres no instructions really. just lists all the different codes? where is 32 and what needs to be done to fix it. is it a plug? where is the plug? wiggle? replace?

its 32. but i dont know where the " driver air bag circuit resistancehigh go to pinpoint test H" ......is?

that really sucks. this whole vc replacement has been since last friday night. just got it on the road yesterday. now this. i'm so sick of this. what are the chances maybe its coolant or a hose burning. something besides the f***ing driver side vc bolts. i hate my life. bye whats that about...

Thanks. I Think I Got It. How Do You Know Where The Correlating Problem It Is? Can I Use The Same Diagnostic Computer From When I Checked For Misfiring In My Cylinders?.

jUST REPLACED MY VALVE COVER GASKETS AND ALL THE O-RINGS. GOT EVERYTHING BACK TOGETHER. THERES SMOKE COMING FROM THE DRIVERS SIDE OF THE HOOD, RIGHT BY THE WINSHIELD. ALMOST THROUGH THOSE BLACK PLASTICS AT THE BOTTOM OF THE WINSHIELD. IT HAPPENED BEFORE I CHANGED EM AND I'VE DRIVEN IT FOR ABOUT...

thanks. I'm going to run to sears and have em check it out.

did they grease the back of the new pads? sometimes that will help with brake noise

MY AIRBAG LIGHT HAS BEEN ON FOR SOME TIME NOW. i NEVER STOPPED TO NOTICE IF IT WAS EVER FLASHING.... QUIK LS--- ARE YOU A LS MECHANIC OR SOMETHING?

Anyone Know How Difficult It Is To Change The Shocks On A 2000 Ls? What About Ball Joints And Control Arms? My Front End Is Noisy As Hell Over Bumps, Sounds Like The Wheels Are Going To Come Bouncing Off.

i have an 00 LS sedan without the sport package. I had some body damage and needed to replace the front bumper. Turns out the one i got was the sport bumper without the chrome on it. No big deal right. So i order the rear one last week, but cant figure out why every single sport bumper being...

I've been noticing a hollow sound coming from my two front wheels whenever I hit bumps in the road. I'm going to go to the mechanic tomorrow and see his opinion, but wanted to first find out if anyone has had similiar problems. I suspect maybe the tie rods or something. The cars got 100K miles...

wow, two 18's thats sick. I wish i never used my trunk, then maybe i could fit em. How much room did they take up any way?. Ive seen a single 18" enclosure and thats no joke

I'm running a single 12" JL w7 with the JL 1000 watt class D monoblock amp. I upgraded from a pair of 12" JL w3's and a 500 watt JL amp. Everyone was telling me I only needed one of these and it would blow the old set up away. They couldn't be any more right. This set-up not only delivers...

So i'm doing the VC seals. put the cover back on the driver side. I'm able to finally get the dipstick back in place. Connected all the wires and I'm about to start on the intake assembly. When I decide to just double check the bolts holding the VC on to the driver side. Put the torque wrench on...

I just finished the job myself, and have to admit it took the better part of two days. It's nnot difficult but very time consuming. If you have the correct tools it goes pretty well. Most of my time was spent fixing the mistakes I made. The first was breaking a PCV hose about ten minutes into...

Hi, I'm just wrapping up my valve cover seal replacement. I used "Quik LS's" posting on how to do it, and the job went pretty well. I'm reconnecting all my hoses plugs etc. Then I get to my dipstick tube which I had pulled in order get it off a long bolt holding the valve cover on. The...