Search results for query: LED Bulbs

  • Order by date
  1. The following words were not included in your search because they are too short, too long, or too common: LED
  1. Project06LS

    For Sale Plethora of parts for 2000-2006 LS

    Any pics of the headlights? Preferably the HID pair and price?
  2. Linc615

    For Sale Plethora of parts for 2000-2006 LS

    Dan I do actually have a kick panel with the trunk and fuel buttons all in intact. maybe missing a clip or 2, but its been reenforced with epoxy backing and put back together in hopes of not breaking again ( these panels are overly brittle like the center vents and steering column it seems.)...
  3. Linc615

    Hid halogen. Headlight

    Not sure if you still looking for bulbs but if i put my 2 cents in, esp if your OCD, do not buy a sylvania D2R bulb nor would i recommend cheaper options; you get what you pay for. Philips has the best bulb and i think is the standard for industry and OEM, not 100% on that tho. In a pinch a...
  4. M

    Hid halogen. Headlight

    I’m using the 4700K on my 2005 LSE in the picture. I would stick with name brands for reliability (Philips/Sylvania/Osram). They are a little pricier though. You get the best deals on Amazon, but you can find the DR2 bulbs at most auto parts store but they’ll be highest price unless you get on...
  5. FDR

    Hid halogen. Headlight

    Gen 2 has two different caps over the front of the low beam bulb. If it's a smooth spherical shape, it's a H11 halogen housing. If its more like a octagonal disco ball, it's D2R HID. That makes it a little easier to ID lights in junkyards and rules out aftermarket HID bulbs. Note that all gen...
  6. T

    Hid halogen. Headlight

    Thanks Appreciate that.
  7. M

    Hid halogen. Headlight

    HID Bulb is D2R Halogen is H11 You should be able to tell by just looking at them when on. The HID are much whiter light, but at first when you turn them on they are a shade of blue for a few seconds while they warm up. Or you can take a look to see which bulbs are in the low beam of the...
  8. pcstac

    1998 Mark viii Lsc low beam conversion.

    I think I got them fixed. I just undone it and started over. I think I had some wires hooked up backwards. I used the DDM Tuning ballast with the 5000k bulbs that came with the other kit. I drove it a couple miles tonight to try them out. They worked great. I'm afraid of them though after the...
  9. pcstac

    1998 Mark viii Lsc low beam conversion.

    Modular97LSC Is a member here. I talked to him on facebook and he recommended DDM Tubing. I think I'm going to give them a try.
  10. X

    1998 Mark viii Lsc low beam conversion.

    My right side works regularly but the left ballast is toast on mine. I think I made a mistake ordering the same ballasts if your having that trouble with yours. Mine are identical to yours. At least I get a pair of new bulbs with the new 26 dollar kit. I'm going to order some different ballasts...
  11. X

    1998 Mark viii Lsc low beam conversion.

    Looks like you did it right as long as you only used the plug end off the OEM ballast power wires. If the wires were reverse on the bulbs, They may or may not work. I have what looks like the same ballasts you have there and one of them went bad right away and burned out the bulb while the other...
  12. Svets96

    Well guys I did a thing

    Congrats on the purchase. And Welcome back to LVC. Very good looking car. It is VERY clean. :cool: Your lighting issue maybe involving a fuse. Check the fuses under the hood and under the dash. See if that helps. Might want to pull some of the bulbs out to see if there are any dead ones...
  13. 04_Sport_LS

    no rear lights

    So besides the license plate light... it's only the tail lights that aren't working... correct? Are you 100% sure the bulbs are good? If the bulbs are good... Use a volt/ohm meter or a self powered test light to check for continuity between the light sockets and the harness plug. If that...
  14. X

    Comment by 'xtriggerman' in article 'How to make 9005 Bulb adapters 4 Low Beam conversion'

    As a continuation, The washers are Nail gun washers from Lowes for the 3 studs. Of course the plastic bubble housing lock tabs were toast so the easiest way to fasten the clear covers is zip ties. When you fit them back into the car, the inner headlight pocket will press up on the zip tie to...
  15. X

    Frustrated, I put in Subaru Cup Holders!

    Been checking out these HID's and your right they scatter the light all around making the roadway dull. What Bulbs are you running in the Low's? I wanted cup holders I could grab while keepin an eye on the road. I-40 around here runs 75-80mph as cruising speed and jerks still weave and tail...
  16. X

    Frustrated, I put in Subaru Cup Holders!

    When I bought my car the carpet was heavily stained down the back of the console carpet on both sides. A testament to the absolutely idiotic design of the Gen 2 cup holders. Absolutely worthless. So as much as I hated the idea of cutting up the Dash's smooth lines, My last out of state trip...
  17. How to make 9005 Bulb adapters 4 Low Beam conversion

    How to make 9005 Bulb adapters 4 Low Beam conversion

    My OEM Low beams craped out with 82K on the car so I was pressed into rigging in a 9005 Hi beam kit. I choose the 9005 at 5000K since I hate the hi power blue lights folks seem to want to blind all the on coming vehicles with these day. Part one for picture size sake.... This modification...
  18. N

    My first Mark VIII Project

    My plans are as follows: 1. Install MVH-1400NEX double DIN head unit. MAYBE a backup camera as well. 2. Replace torn headliner. 3. Install remote start, with a push-button starter in place of the key cylinder. 4. Upgrade to dual crossover exhaust with Magnaflow mild mufflers. 5. Polish...
  19. Tay937

    No crank no start after cluster removel

    Thanks im glad i didnt get to expensive.i dam sure didnt think it even had a fuse that was the first place i tried to look .didnt know it was a third fuse box on passanger side smh
  20. Stinkin lincoln 1

    No crank no start after cluster removel

    Was going to be my suggestion I changed some bulbs out and blew the fuse as well on my 1st ls took me a few hours to figure it out. Glad you found it.
Back
Top