Search results for query: *

Those fuses are good Joegr

Just wondering the relay for the wiper motor under the hood of the car is labeled Relay #1 and I look under the hood and there is nothing in the relay 1 slot and I put a spare in there and there is nothing for the relay to connect too Wipers don’t work and out of nowhere my wipers stopped working.

Did my rear brakes and couldnt for the life of me figure out how to release the parking brake module (the cable that hooks onto the module itself) so i removed the caliper completely and now I cannot get the cable back onto the module. Any help would be much appreciated. 2005 LS 3.0

Fuse blew again.. I noticed I have lots of water in my driver's door, to the point where every connection is soaked in water. Would this cause the fuse to blow every time I replace the fuse? I am currently draining the water and going to throw a heater in my car and inspect the weather...

Threw a new fuse in the and the problem seems to have gone away now. My CEL is off now too. Thanks Joegr

Just checked the fuse and it is blown, going down to the store to grab some spare fuses and hopefully it fixes everything.

Thanks im going to go back and re check the fuses, my passenger seat motor was acting up too, very slow to move and sometimes it wouldn't even move, f2 .07 might be the culprit because my electronic parking brake light on the dash will light up when driving but the brake does not engage.

I have recently having issues with my fob, once the car goes to sleep, I am not able to unlock my car with the fob, thankfully my door lock module is broken so it never locks the door automatically so I am able to put the key in the ignition and when I turn the key to accessory, the fob works...

I got the LS back on the road after sitting for about a year in my driveway. Threw in some Mobil1 5w20, new coils, new plugs, new PCV valve and have new o2's to put in if I can borrow a lift for an hour when all this shit blows over, also installed my Diode Dynamic LED's low-beams, just...

Haha, I usually just keep them snug, I just have forgotten to tighten it up when I did my coil and plug job, the car has been sitting, just doing maintenance on it, definitely dodged a bullet.

Well turns out I forgot to tighten cylinder 4 spark plug when I put my new coils in, fixed it right away. Stoked. I was so worried the past few days but I stayed positive.

2005 3.0

I know Joegr said it might be valves needing adjustment on the other thread where the member's LS was knocking on startup, where my car makes the knocking sound only at temp. I knew I should of went with a higher weight, thankfully my brand new crv takes 0w20 and I have 5 quarts of it already...

Just changed my oil with mobil1 5w20 and noticed when it got up to normal temp there is a knocking sound on my driver side valve cover, I did use cheapo coils this time around but I noticed my oil was a bit low when i drained it, I read a valve adjustment could be the issue, I also notice my...

Can you still have the airbag? if so, hit me up, I want one lol

I ordered some "stock" housing for my 06 bumper, still need to find a way to mount it to the bracketless bumper.

Thank you, They are pretty rare especially in the shape they are in, basically flawless, couple marks from the previous owner bottoming out but I already wet sanded it down. I lucked out big time, only paid $40 CAD for them.

I found a deadly mint set of gen 1 LSE side skirts and installed my grill insert for the lower grill on my 06 bumper.

thanks man

I may be wrong then, I dont see them anywhere, I see the end but the wire goes into what looks like part of the suspension, if you have a diagram or something that can point me in the right direction that would be amazing Joegr