1993 Lincoln Mark 8 with 99 Cobra engine and 5 spd

[BlackenedMark8]

Like the title says. I have zero time to work on this car and its gotta go.
Its a 1993 Lincoln Mark 8 with 198k miles on a very clean and straight body. The interior is very clean and everything works in the car.
The engine is a perfect running 4500 mile Teskid block with a steel crank out of a 99 Cobra complete with the 5 spd conversion. When we got the car the engine wouldn't start due to the clutch pedal being bolted too close to the harness which rubbed and kept popping main fuses. The problem has been fixed and the engine runs perfect. All the car needs is a air compressor for the suspension. We manually filled it and the lines and air bags all hold air. The shifter needs to be moved back so the console can be installed. We found a way to make this work making a simple bracket. The engine is running on the harness and computer from the 93 Lincoln so its using 2 ignition coils and wires instead of the COP setup.
The car is located in Astoria Queens NY. I won't seperate the motor from the car, it goes as is for $2K Firm.

__________________

 

[fastmark1993]

hey you should move to canada so i can purchase your car.

 

[Staffamerica74]

Does it drive?

 

[97SilverLSCcobra]

Does the hood close all the way?

 

[BlackenedMark8]

Sorry for the delays in responses, It doesn't drive because the clutch pedal is removed. The reason why it was removed is because the clutch was installed too close to the main harness and it chaffed a wire and prevented it from running. I moved it around by hitting the starter while in gear. The drive train is in tact and functional with the clutch pedal installed.

Yes the hood closes.

Car still available.

 

[George Eisenhart]

Whats different or better with the cobra engine? does it have H beam rods? What heads does it have? George

 

[BlackenedMark8]

Whats different or better with the cobra engine? does it have H beam rods? What heads does it have? George

The only big difference is the block, The teskid block is one of the strongest aluminum blocks out there. The pistons and rods are the same as any other mod motor as well as the heads. The crank is steel.

 

[Aquabrit]

The Mark VIII engine also has the Teksid block, but 'B' heads as opposed to the 'C' heads of the 99 Cobra.

 

[DreDaDevil]

is it still available?

Hey pm me if it is, I might be interested.