A couple years ago, I set out to rebuild a set of IMRCs for my Mark VIII, the purpose being to replace the o-ring gaskets that can dry up and leak air at the ends of the shaft.
All was going well until I made a careless attempt to drill out a stubborn butter fly screw.
If anyone wants the pair of IMRCs and the valves, let me know.
I'll sell the pair for $20 obo and shipping.
What will shipping cost? I don't know, your estimation at USPS is as good as mine is.
Uploaded with ImageShack.us
The pair are all cleaned, the o-rings replaced, but one of the butterfly screws was drilled out crooked. I believe it could be repaired, but it's probably easiest to just use these for parts or to build a pair of IMRC deletes.
I'm just posting these up here before I recycle them.
All was going well until I made a careless attempt to drill out a stubborn butter fly screw.
If anyone wants the pair of IMRCs and the valves, let me know.
I'll sell the pair for $20 obo and shipping.
What will shipping cost? I don't know, your estimation at USPS is as good as mine is.
Uploaded with ImageShack.us
The pair are all cleaned, the o-rings replaced, but one of the butterfly screws was drilled out crooked. I believe it could be repaired, but it's probably easiest to just use these for parts or to build a pair of IMRC deletes.
I'm just posting these up here before I recycle them.