2001 v8 Non Sport Rear Sway Bar Bushing Size please Help

[00whitelsv8]

Hello, Sorry to post another sway bar bushing thread but i have looked for hours, i really only see things for sport models. My car is a 2001 V8 Non-Sport and my rear sway bar bushings are very worn out, i can slide the bar side to side, i was wondering if anyone knew the size of the rear bar so i can order some aftermarket bushings, thank you very Much

 

[LeaSr77]

Man good luck with that one. I don't i've seen where anyone on here has changed out the rear sway bar bushings. That would be a nice piece of information to know. I just did my front ones on my 01 V8 sport. But a good question to try and find out is are the front and rear sway bars the same size because if they are, then you might be in luck.

 

[00whitelsv8]

I wish they were but the rears are alot smaller and the sport is bigger then the non sport

 

[02V8Sport]

I changed the rear bushings on my 04 sport. They are quite a bit smaller than the front bushings.

 

[97stscaddy]

Wrap a tailors measuring tape around the bar, take that measurement and divide by 3.14. That will give you the approximate diameter of the bar.

 

[daves2000ls]

3.14159.............

 

[pektel]

3.14159265358979323846264338327950288419716939937510

 

[97stscaddy]

Haha. Smartasses

 

[nc_chrome07]

Since it appears that no one has changed the sway bar bushings on a no-sport you might want to take it to a shop and have them measure it for you. I had that problem with my front sway bar bushings. Simeone on here told me the size fir the front bushings so just to be sure i had them measured about to days ago and it checked out i have a 2001 ls6 non-sport.