Happ
New LVC Member
Hi, I have some nice LS seats that I would like to put into a hot rod and was working on figuring out the wiring for the power feature. The drivers seat is the one I am having problems with. It is an 8 way power with airbag and i'm guessing memory. The passenger seat only has a red and black wire and with 12 volts, I get it to work.
I think the body control module is bad, can I bypass it and if so does someone have a schematic of the harness? I was able to pin out the switch but didn't want to burn anything out by giving it a try before I asked.
Thank you!
Chad
I think the body control module is bad, can I bypass it and if so does someone have a schematic of the harness? I was able to pin out the switch but didn't want to burn anything out by giving it a try before I asked.
Thank you!
Chad