The Motorsports Project
New LVC Member
Months ago I posted about how The tail lights on the passenger side of my 00 ls stopped working after I tried to hook my trailer wiring up without know it would cause damage. Well here is what is going on with it!
I was able to get the tail lights to come on by jumping two wires in the plug. But recently I purchased a trailer light module and when I unplugged the tail light to plug in the wiring harness for the control module the wire came out and I cannot get the lights to work again.
I have tested the plug and every wire but the ground has 14.9 volts while the car is running with the lights on. The brake lights work but no running lights.
It has no passenger side license plate light or third brake light in conjunction with no tail lights on he deck lid or quarter panel. I replaced the turn signal switch,tail light harness and rem. the only thing I have not done is replace the headlight switch. I also tested all of the fuses and all toned out on the multimeter. wtf is going on?
I was able to get the tail lights to come on by jumping two wires in the plug. But recently I purchased a trailer light module and when I unplugged the tail light to plug in the wiring harness for the control module the wire came out and I cannot get the lights to work again.
I have tested the plug and every wire but the ground has 14.9 volts while the car is running with the lights on. The brake lights work but no running lights.
It has no passenger side license plate light or third brake light in conjunction with no tail lights on he deck lid or quarter panel. I replaced the turn signal switch,tail light harness and rem. the only thing I have not done is replace the headlight switch. I also tested all of the fuses and all toned out on the multimeter. wtf is going on?
