Today I replaced my rear suspension in ole faithful, my v8 2000 LS. The parts I pulled off are heavily worn, but they include an upper control arm and sway bar link. I also changed the strut, pretty sure that one is OEM as well. Wondering if there is any interest in these parts even though the ball joints are completely worn. I read about people replacing their bushings by pressing them out and pressing new ones in. Are there shops that restore OEM ball joints? Especially the control arms, I read on here that none of the aftermarket ones are as good as OEM. My lower control arms are good so I didn't replace those but I do have another set in good condition. Also replaced my tie rod (both ends) which are heavily worn as well. Before I threw them away I figured I'd ask if anyone wants them.
Any use for used OEM upper control arm/sway bar link?
- Thread starter Jiwek
- Start date