anybody installed an AM alarm?

[TiziteLayinLow]

im pretty good with electronics and pulling panels and what not in my car.

however - and this is apparently a big however - i have never installed an alarm. im looking at a viper 700 series, alarm, remote, 2way features. i dont mind the $$ to pay someone to install it, but nobody i can really trust around here to do a great job.

thanks.

 

[MikeB]

I've installed hundreds of alarms, but this is not the car to learn on unless you have alot of patience and time.

The lights use resistor values, each door needs to be diode isolated, and if you plan on putting on remote start a couple extra outputs will have to be set up.

Wires will need to go into the drivers door, the trunk, and as usual in the dash.

What year is your car?

 

[TiziteLayinLow]

I've installed hundreds of alarms, but this is not the car to learn on unless you have alot of patience and time.

The lights use resistor values, each door needs to be diode isolated, and if you plan on putting on remote start a couple extra outputs will have to be set up.

Wires will need to go into the drivers door, the trunk, and as usual in the dash.

What year is your car?

2000

 

[MikeB]

If you want I can try to find the wiring lists and email them to you.
They list just about every wire you will need, the location, and color code.