Here it is guys. Great mod for sc cars or n/a cars alike.
For sale:
1-Short runner Lower intake: Total runner length shortened %35 by volume. Runners epoxied back into intake, and epoxy air dams added on the sides of intake. Inside of runner smoothed and polished. Ports gasket matched/ported. Also modified to use two inner bolts for better sealing udner forced induction applications.
2-IMRC's are deleted and ported.
1-Upper bonnet: EGR deleted, smoothed inside and out, polished inside, semi polished outside. Modified for FRPP single Blade TB.
1-FRPP single blade TB have reciept for $300
1- Cobra fuel rails with Adjsutable fuel pressure regulator.
8-24lb injectors
1- Throttle body linkage to work with Mark VIII. New have reciept for $75
1- Polished steeda aluminum intake tube with Silicon hose and T-Bolt clamps to be used with Forced induction applications.
1- new IAC valve
Set of new gaskets. Have reciepts for $65
Price $1350
For sale:
1-Short runner Lower intake: Total runner length shortened %35 by volume. Runners epoxied back into intake, and epoxy air dams added on the sides of intake. Inside of runner smoothed and polished. Ports gasket matched/ported. Also modified to use two inner bolts for better sealing udner forced induction applications.
2-IMRC's are deleted and ported.
1-Upper bonnet: EGR deleted, smoothed inside and out, polished inside, semi polished outside. Modified for FRPP single Blade TB.
1-FRPP single blade TB have reciept for $300
1- Cobra fuel rails with Adjsutable fuel pressure regulator.
8-24lb injectors
1- Throttle body linkage to work with Mark VIII. New have reciept for $75
1- Polished steeda aluminum intake tube with Silicon hose and T-Bolt clamps to be used with Forced induction applications.
1- new IAC valve
Set of new gaskets. Have reciepts for $65
Price $1350
