Control Arms by MAS?

turn_on68 said:
No one knows anything about MAS parts? How well they are made as compared to Moog or TRW?
Click to expand...

Junk, but Moog is been crap too lately....TRW is a thing of the past.

I would buy MOTORCRAFT Part # MCS10763, MOTORCRAFT Part # MCS10764 t bird uppers.
Cut off stud for air ride and weld on to the new uppers if you have air ride.

rockauto about $80 each......you get what you pay for.
 
ford nut said:
Junk, but Moog is been crap too lately....TRW is a thing of the past.

I would buy MOTORCRAFT Part # MCS10763, MOTORCRAFT Part # MCS10764 t bird uppers.
Cut off stud for air ride and weld on to the new uppers if you have air ride.

rockauto about $80 each......you get what you pay for.
Click to expand...

I need lower control arms.
 
I've actually had better luck lately with Dorman rather than Moog. I don't know what is going on with Moog. I had a control arm go bad in 8 months and 4000 miles, definitely defective.
 
Raybestos professional grade are very nice. They have grease fittings and a thickly boot for the balljoint. 507-1397 and 507-1398 are the thunderbird part numbers, usually cheaper than the Mark VIII part.
 
If you don't have air ride anymore you can and should just shop as if you own a Thunderbird/Cougar. Exact same parts without Lincoln Tax.
 
You must log in or register to reply here.

Members online

No members online now.
Total: 359 (members: 0, guests: 359)
Back
Top