Double Din

They sell one on Ebay that is a single din and a opening below that. Does anyone know if this is the right size after you remove the piece in the middle on the two openings.
 
For mine the single din one was too wide. When i cut it out the opening left too much of a gap for my liking. I just took the face off the factory radio and cut it to fit the screen. It looks a lot cleaner and almost looks like it belongs. Here are some pics of mine. But if you do it this way be careful because you only get one chance. Measure twice, cut once.

LSpics039.gif


LSpics041.gif


LSpics042.gif
 

Members online

Back
Top