Exhaust cut-outs in bumpers?

K

KainDTE

Well-Known LVC Member
Joined
May 14, 2005
Messages
383
Reaction score
0
Location
Largo
Hey were the LSC's the only marks that came with exhaust cut-outs in the bumper cause mine doesnt have them and i have seen alot of marks with that (mines not an LSC)
 
Only 93-94's did not get bumper cutouts. Anything newer, including LSC's got the cutouts. What year is your car? Mine does not have them because I have a 94, it sucks. :mad:
 
on my 94 I just said F it and went without mufflers. I have high flow cats that quiets it down a little. I've got straight pipes where the mufflers go with turn downs.
 
eh, Maybe your car was in an accident and they replaced the rear bumper with a 93 or 94.......... Or maybe it was a late 94 model.........:confused:
 
Yea, its true 93-94 didn't have them 95 up did. Does your Mark VIII badge on the back of your car say Intech32v? this also started in 95.
 
02LSE96LSC91SE84TC said:
Yea, its true 93-94 didn't have them 95 up did. Does your Mark VIII badge on the back of your car say Intech32v? this also started in 95.
Click to expand...

nope... hmmm so maybe my car is a 94?
 
Or been fixed in back at one time. Body shops don't get into details like that alot. Is your radio a din or din 1/2.
 
haha I'm confused maybe my car is a 94/95 SUPERBREED !!!! not really though lol
 
I suppose its possible there was a point on the line where the interiors changed to the new style, but the bumpers and emblems didn't yet?
 
02LSE96LSC91SE84TC said:
I suppose its possible there was a point on the line where the interiors changed to the new style, but the bumpers and emblems didn't yet?
Click to expand...

and isn't there a radiator hose cover that says intech on the 95's up? cause i didnt have that i just had the 2 piece one over the engine that said "Mark VIII 4.6L Four Cam" and a lincoln symbol
 
The cover your thinking of is on 97, 98s had no cover. Your 2 piece cover is correct. I do think what they say changed from 93-96. one says 4.6 four cam and the other says Mark VIII 4.6L four cam. don't know specs on that though. Mines a 96 and says same as yours.
 
02LSE96LSC91SE84TC said:
Yea, its true 93-94 didn't have them 95 up did. Does your Mark VIII badge on the back of your car say Intech32v? this also started in 95.
Click to expand...


intech started on LATe 1995 and lsc,earlier 95 did not have intech32v ,but did have cutouts
 
Im a big fan of turndowns, I almost wish my 97 didnt have cutouts. But then again lincoln did a great job of making the exhaust look really good on the 2nd gens.
 
This is topic related but the questions goes out to anyone

Can a 95-96 bumper with cut-outs be directly bolted on to a 93-94 car? Paint of course is a different issue.
 
materialboi said:
ya, could i replace my 93 rear with a newer one with the cut outs?
would it bolt up the same?
Click to expand...
Yep, You would obviously have to get the tips done differently. Im thinking about doing it and putting some nice 3 1/2" tips on.
 
GMAN said:
I cut mine out myself.
Click to expand...

what did you use? just a jigsaw? and did you put any fiberglass up under it to or did u just use the exhaust to hide it?
 
93-96 bumper covers are interchangeable. So, you can put a 95-96 bumper cover on a 93-94 with no problems....they bolt right up.:D
 
You must log in or register to reply here.

Members online

Total: 137 (members: 1, guests: 136)
Back
Top