factory alarm problem 95tc

[bucketthead]

hey guys my factory alarm on my 95 tc goes off just about everytime i turn my car off after i drive it can u tell me how to disconnect it or fix it or somthin :feedback

 

[Pepsi2185]

Are you sure its factory. Is there a little blinky red light anywhere? Is it a siren or tied in with the horn. Ford started to use a lot of code alarm units as factory about that time. Do you have a fob for it?

 

[bucketthead]

i think it is factory no blinking lights or nothin it is tied into the horn and is turned on and off by the keyless entry system that the car came

 

[Pepsi2185]

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&item=7929860926&category=33723

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&category=12040&item=5726513691&rd=1

First or second one? The only reason i ask is the location for the modules is different. It sounds like your ignition trigger is confused on the alarm and its best just to disable it. It is only a noisemaker anyway. For the ford factory remote it is either front pass kick or near the steering wheel. ford factory add on, it is with the ignition harness.

Keep us posted.

 

[bucketthead]

i have the second one how would u disconnect it

 

[97LTCSS]

i have the second one how would u disconnect it

i took mine to the dealership, and just tell them, you want your stock alarm disconnected...and since they charge by the hour...and it only takes like 20 minutes it only came out to 70 bucks.....thats for fools like me that don;t know whit about these newer cars...

 

[Pepsi2185]

This one is probably not going to be easy. i believe the keyless module is built into the LCM (light controll module). it is under the dash either to the left or right of the steering column. The horn wire is a negative trigger and is blue. You may be able to just clip that wire. If the alarm is built into the LCM it is going to be a bit extensive to fix the issue. The LCM system started in 95.

Pre-95 the keyless module is in the passenger under dash or kick area. But hit lock and unlock on the remote in a quiet area and listen for the clicking. It is a relay clicking. This will reaffirm where the keyless module is.

Keep us posted on your findings.

 

[97LTCSS]

i really don't get what your trying to say, but my door locks still work with my keyless, and the alarm still goes off if you open a door when its locked...but my alarm, like the kill switch and all that other bull:q:q:q:q is what i got disabled...mine used to go off all the time like crazy....sometimes in the middle of the night it would do it....3 times i had to come home from work to turn it off.....hope that helps, just have it disabled...