Gen 2 Charcoal Interior

GMAN

Dedicated LVC Member
Joined
Jan 26, 2005
Messages
4,747
Reaction score
31
Location
Spring, Texas, United States
Contact seller
OK, after much going back and forth, I have to do the realistic thing and sell these items. So, everything is for sale. If I missed anything that you need, PM me.
Dash including passenger airbag $150
Driver's seat ..........................$175
Passenger Seat ......................$175
Back Seat (bottom and Back)... $130
Door Panels (both)...................$150
Back seat Panels left and right ...$50
Front Seat trim A pillar (pair)......$20
Steering Wheel.......................$100
Center Console.......................$150
Working Neon with ballast.........$200
98 Tranny.............................$400
Motor...................................$500

100_3233.jpg

100_3234.jpg

100_3235.jpg

100_3236.jpg

100_3237.jpg

100_3238.jpg

100_3239.gif

100_3240.gif

100_3241.gif
 
Last edited:
Did that car have the factory cell phone? If so, I'd like the a-pillar trim (with the microphone in it). Also, how much for the dash defroster panel?
 
Did that car have the factory cell phone? If so, I'd like the a-pillar trim (with the microphone in it). Also, how much for the dash defroster panel?

The car came with a car phone, but it was installed aferemarket. No microphone. For the dash defroster, let's trade. The driver's seat panel side for this.
 
The dash defroster has got to be perfect. I bought one a couple years ago to replace my cracked one, but the person used to have something mounted on it, so there are marks on it from removing the mounting tape. I can't stand little marks like that. If it's not perfect, I don't need it.

Thanks. Let me know. A trade would be fine with me.
 
The dash defroster has got to be perfect. I bought one a couple years ago to replace my cracked one, but the person used to have something mounted on it, so there are marks on it from removing the mounting tape. I can't stand little marks like that. If it's not perfect, I don't need it.

Thanks. Let me know. A trade would be fine with me.

How's that piece look?
 
That cover that fits over the dash looks good. There is one small melt point where it started to get hot in the fire, but it was extinguished before any real damage could be done. It tucks down to the windshield and is not noticeable.
 
Interested in the rear neon and ballast, how much to ship to 74133?
 
That cover that fits over the dash looks good. There is one small melt point where it started to get hot in the fire, but it was extinguished before any real damage could be done. It tucks down to the windshield and is not noticeable.

Can I get some pics of the damage?
 
Front Bumper....SOLD
Grille........SOLD
Left and Right Fender......SOLD
Header Panel........SOLD
Neon.........SOLD
Wood Shifter......Pending
Wood Steering Wheel......Pending
Ray Switch........Pending
 
how much would that cost to ship!? I need a mint rear bumper cover but for the right price.
 
Hey GMAN I just started a thread looking for some door lock parts for a gen 2 would you happen to have the little arm that connects to the lock assembly on the drivers door?It's the arm that the rod from the latch assembly connects to,it's held on to the tumbler with a circlip.THANKS
 
Hey GMAN I just started a thread looking for some door lock parts for a gen 2 would you happen to have the little arm that connects to the lock assembly on the drivers door?It's the arm that the rod from the latch assembly connects to,it's held on to the tumbler with a circlip.THANKS

My doors are still in tact, and I want to keep the doors together with the car until just before it goes to the Junkyard.
 
you know, you never sent me pics of the damage on the defroster vent....
I would rather have the glove box door anyway.
Can you get me a pic of the door? The leather on mine is starting to come out of the seam at the top where it folds over the edge.
If yours is good, you've got a deal...
 

Members online

No members online now.
Back
Top