Help Locating Part - Vacuum Lines Throttle Body to EGR and Fuel Pressure Sensor

R

RJLipscomb

Active LVC Member
Joined
Dec 23, 2013
Messages
66
Reaction score
2
Location
West Palm Beach, FL
2006 V8:

Can anyone identify this part and advise where I can get a new one?

IMG_7995.jpg

I know it has connections identified as:
Fuel pressure sensor vacuum connector
Exhaust gas recirculation (EGR) system module vacuum connectors

I broke the hard plastic vacuum lines in several places. And though I have a temp fix in mind, I want to get a new part to complete the repair.

IMG_7995.jpg
 
I bought some vacuum hose and fittings from NAPA and made my own harness. I broke the plastic line out of the old connectors and used straight connectors to attach the new line to the factory connector........
P9032446.jpg
P9032447.jpg
P9032448.jpg
P9032449.jpg

P9032446.jpg


P9032447.jpg


P9032448.jpg


P9032449.jpg
 
wade0731 said:
You can find it here I believe: http://clockspringremoval.blogspot.com/2009/07/06-lincoln-ls-v8-engine-parts-and.html

I believe its item number 6 if you scroll down. Don't take my word for it, wait on some others to chime in.

6 9E499 Fuel pressure sensor vacuum connector
7 9E498 Exhaust gas recirculation (EGR) system module vacuum connectors
Click to expand...

This is correct. The vacuum line has one (1) 9E499 connector and two (2) 9E498 connectors on one end. The other end has a connector to the back of the throttle body, actually the part between the throttle body and the intake manifold.
 
LS4me said:
I bought some vacuum hose and fittings from NAPA and made my own harness. I broke the plastic line out of the old connectors and used straight connectors to attach the new line to the factory connector........
Click to expand...

Thanks, that looks like it may be my only option. I was, still am, hoping to find a new vacuum harness already assembled and factory sealed. For now, I have added clear tubing over the hard plastic lines and sealed the ends, and a portion within the clear splice line, with silicone. However, this tubing is not suitably heat resistant and will not work as a permanent solution.
 
joegr said:
You can get it brand new, in the factory sealed bag from FordPartsGiant. I just recently got one myself.
The vacuum hose assembly is 3W4Z-9E498-BA. It's just described as "connector."
Click to expand...

I took my old shattered part to my local Ford. They were unsure based on the parts diagram but ordered one for me... $63 list - $45 discounted price. The parts diagram list the three connectors as different numbers and only one actually is the right number (3W4Z-9E498-BA) for the vacuum harness. Thanks FORD!

Easy in and done.
 
RJLipscomb said:
2006 V8:

Can anyone identify this part and advise where I can get a new one?

View attachment 828465321

I know it has connections identified as:
Fuel pressure sensor vacuum connector
Exhaust gas recirculation (EGR) system module vacuum connectors

I broke the hard plastic vacuum lines in several places. And though I have a temp fix in mind, I want to get a new part to complete the repair.

View attachment 828465321
Click to expand...
I think I ordered it through Rockauto or Ebay ...brand new ...its made in Mexico
 
This model is possible to find and not yet obsolete. That number is...

5W7Z-9E498-BA​

Should only cost you around 30 bucks. Which is quite a bit cheaper than the old obsolete part. I do notice that one of the lines is a little bit shorter than what was originally equipped. Not that big of a deal to modify. Unless you want to build the entire thing from scratch this might be a viable option.
 
Last edited:
You must log in or register to reply here.

Members online

No members online now.
Total: 79 (members: 0, guests: 79)
Back
Top