I'm going to put Hoen Xenonmatch Plus Highbeam bulbs in my foglights and I was wondering if any of you guys had a few pictures if you have done this? Has anyone had problems without the special connectors running plus bulbs?
High Beam Bulbs in Foglights...pictures?
- Thread starter KD00LS
- Start date
Quik LS
Dedicated LVC Member
no special connectors - plugs right in.
you can see mine in the pics in the link on my sig.
you can see mine in the pics in the link on my sig.
machlsowner
Active LVC Member
Hey Quik, are these regular headlight bulbs you guys are talking about or something else, I haven't heard of this.
just a word of caution I did this on my 03 (silverstars) and my drivers side housing melted and the passenger is starting. I know the design pre-03 was different so maybe that's why I'm the only one complaining.
G
GrayGhost1
Guest
The issue is wattage. The stock fog light bulb (9145) operates at around 45 watts. The 9005 Hoen Plus bulb operates at 60 watts so it should not "melt" the connector. Now, the 9006 and H11 Hoen Plus bulbs operate at 80 watts and will definitely melt the factory connectors. That's why we sell the HD connectors for the 9006 and H11 bulbs. I know that Sylvania has a 9145 bulb now in the Silverstar but I don't know the wattage of that one.
The 9145 Hoen bulb operates at 45 watts and should be all you need for the fog lights.
The 9145 Hoen bulb operates at 45 watts and should be all you need for the fog lights.
Quik LS
Dedicated LVC Member
machlsowner said:
Right - using the 9005s in the fogs instead of the 9145s.
Like Ken said - be careful - I upgraded my headlight to 7000k blueish looking bulbs and wanted my fogs to look the same - so I put in a set of the 9005s in the fogs. It's been a couple of years - no problems.
G
GrayGhost1
Guest
Hoen doesn't make an HD connector for the 9005 bulbs. They only make them for the 9006 and H11.KD00LS said: