how much to make the markvii run 13's?

sho89mtx said:
how much money do you have to invest to get it to run 13's?

thanks,
scott
Click to expand...

You could do it with exhaust, some minor bolt ons, and either a 100/125 shot.
 
if i was to do another motor i would do like a 200-300 shot all the way down the track
 
i ran 15.25 with my fat rear and about 3-400 lbs of fire gear in my trunk. that was also my first time running, so i assume that without the hinderances it would have run round 14.7-8, and it doesnt take too much to knock off .8-9 sec's(that is if there are already no mods)
 
hitting 13's

my goal is 12 flat so like you Im starting a buld up Kook has a nice set of headers for about $550 uncouted, and a custom exust from a good shop ran me $450 with cats. there are a cople places that will custom make a tork converter with any stall speed you want for about $660. superchips makes a good chip for about $300. and just to be sure for about a 3.73 rearend for about $190 would defintley put you in the 13's. so lits see that looks like $2150 for mid 13's no NOS or stuff like that will give you the consistencey to give you a 1/2 desint run. Tires are also recomended 245/50/16 BF Goodrich KDWS.
 
How about 3.73s, exhaust, a Vortech S-trim with a 25hp shot, with some chip tuning! That's my intentions. Unfortunately, it's gotta be done by April 17th fun ford weekend..goin for broke..literally! I don't think there's a cheap way to make a 4,000lb car run 12s or 13s without removing trimming the fat which means giving up some comfort on Mark VIIIs. I want the performance but, I love my bell and whistles! (-:
 
DOHCtor_Mark said:
How about 3.73s, exhaust, a Vortech S-trim with a 25hp shot, with some chip tuning! That's my intentions. Unfortunately, it's gotta be done by April 17th fun ford weekend..goin for broke..literally! I don't think there's a cheap way to make a 4,000lb car run 12s or 13s without removing trimming the fat which means giving up some comfort on Mark VIIIs. I want the performance but, I love my bell and whistles! (-:
Click to expand...

That is not so true. There is a guy on another site (Nocera...the guy in one of my videos I posted) that has basic bolt ons.....full exhaust (headers and all the way back), 4.30's, mass air/conical filter, 90MM MAF(I know he got a lightning.....), built tranny, a chip (which has been reburnt several times) and he runs in the high 13's with a full stereo system with several amps and 2 JL12W3's in the trunk.

There is also a guy (ModPwr here) that ran 12.9 with s vortec sc.....not sure what else he had done, but it was mildly boosted (according to him). So, with what you plan you should EASILY be in the 12's.

Just make sure you know what you are doing as far as upgrades before you get the chip....or you will have to have it reburnt for each upgrade. Also, I would recommend a Baumann Engineering shift kit as well.......you will be impressed. :Beer
 
sho89mtx said:
how much money do you have to invest to get it to run 13's?

thanks,
scott
Click to expand...

EASY, money. go bout 60-70 in the 1/8 mile and you can get into the 13's
 
keep the car nice

You don't have to gut your mark to make it fast. there are many companys out there that make DOHC Crate engines that will put out 1200HP, at the crank that will fit in the car with the stock mounts. now estamate a 10% power loss betwen crank and street. that would be 1080RWHP, even at 4000LBS wou can still move fast. An F-Body is 3800LBS w/o gas or drivers, if they can do it why cant we? We can.
 
I would Like to know what Stall speed y'all would recomend/ are using.
 
dertyclown said:
You don't have to gut your mark to make it fast. there are many companys out there that make DOHC Crate engines that will put out 1200HP, at the crank that will fit in the car with the stock mounts. now estamate a 10% power loss betwen crank and street. that would be 1080RWHP, even at 4000LBS wou can still move fast. An F-Body is 3800LBS w/o gas or drivers, if they can do it why cant we? We can.
Click to expand...


excuse me, but if you gut a stang its 2200lbs. my friend did it , and we weighed it.
 
Ok

MrWilson said:
excuse me, but if you gut a stang its 2200lbs. my friend did it , and we weighed it.
Click to expand...
oK tHATS A GUTED STANG I was talking about an F-Body witch a mustang is not. And how did y'all get 2200lbs that seems a little to low, 2900 or 3000 seems more resonable
 
2200 lbs? It must only have one seat and a steering wheel in it. I have had many a Stangs and yes I too have gutted many a Stangs as well and never got under 3k and that was with a Notchback with lexan windows in the rear 1/4's and fiberglass hood with no bumpers front or rear, no sway bars etc.
 
thanks

ONEBADMK8 said:
I love my 9.5 inch 3500 stall.
Click to expand...
I was thinking of 3200 so im glad I asked. the 9.5 is the onely way to go. thanks for the tip, ill get one orderd up. Would you rec. replacing the Intermediate Shaft? :feedback
 
You must log in or register to reply here.

Members online

Total: 72 (members: 1, guests: 71)
Back
Top