Just got my suspension conversion kit from StrutMasters...

[JC1994]

Just got through unpacking my 1.5 inch lowering kit,It looks pretty good only one small issue,one of the studs on the front strut [there's 3 of these on the top] came out or was not pressed all the way in so I'll have that to deal with otherwise it's OK.
I am glad they paid the shipping because the kit is pretty heavy.369.00 delivered,gold member price. Does anybody know if I have to change the rear lower shock bolt? If so,what size? I would like to have every thing I need before I start,I got Monroe sensa trac shocks for the back,92-97 T-bird.I'll wait till early morning to start,it's like 95 degrees and 60 percent humidity right now,can you say HOT!?!?! I think i'll wait,it will be about 65 in the morning. :wrench JC....

 

[MrScalia]

lower rear shock bolt is a 3/4 .... I impacked it off. on the other side is a bolt with a thing on the side so it doesn't spin.

 

[JC1994]

Will the stock lower shock bolt work with the new shock? JC...

 

[BlackIceLSC]

little late but, the stock rear shock bolt works fine with sensatrac part number 5965(92-97 T-Bird non-sport/SC).

It's got a locking-tab equipped nut on the rearward side...works fine. No need to replace it.

I know you're already done, but this info is for anyone searching in the future.

 

[JoeyLincolnMK8]

well that answers my question from the other thread...lol 1.5 inch is cool.