My System

[Motts]

SUBWOOFERS:
2 Kicker 12" L7 Solo Baric 4 Ohm Square subwoofers

AMPLIFIERS:
Kicker Impulse Series IX2302 Amplifier
Kicker Impulse Series IX252 Amplifier
CROSSOVER:
Kicker X3I Active Crossover
HEAD UNIT:
Clarion DRX 6575Z AM/FM/CD with 4 volt Pre-out
COMPONENT:
Kicker RS5 Titanium Coated Component System w/ passive crossovers
POWER WIRE:
Stinger HPM Platinum 0 Gauge Power Wire
AUDIO WIRE:
Stinger & Rockford Fosgate
ROCKFORD DIG CAP

 

[Motts]

Pic

 

[Motts]

i CAN STILL OPEN THE SPARE COMPARTMENT A LIL.. LOL ENOUGH TO GET THE SPARE OUT AND GET TO THE BATTERY IF I HAVE TO.... THE BOX WAS CUSTOM BUILT BY SOUNDCRAFT, AND MODIFIED A LIL BY ME, TO MAKE IT LOOK LIKE IT WAS BUILT INTO THE TRUNK.
I ALSO CUT THROUGH THE FLOOR PIECE TO MAKE THE AMPS LOOK FLUSH... i PLAN ON ADDING A PIECE OF PLEXI GLASS OVER THE TOP WITH THE LINCON EMBLEM ETCHED INTO IT FOR SHOW PURPOSES.. I THINK IT'LL LOOK SHARP BUT INORDER TO DO THIS, I'LL HAVE TO ADD A FEW FANS TO KEEP SOME AIR CIRCULATION. THE AMPS HAVE BUILT IN FANS BUT.. NOT ENOUGH TO KEEP THEM COOL... IF THEY ARE COVERED.... i WAS GOING TO DO A FIBERGLASS ENCLOSURE BUT DONT REALLY HAVE THE TIME AT THE MOMENT, AND HAVENT REALLY FIGURED OUT HOW I WILL GET MY SPARE OUT.... i'M OPEN TO IDEAS

 

[ohioLS]

hey motts do u have any teeth left after the bass jars them lose? HAHA

-Scott-

 

[Motts]

actually my left front one is kinda loose.. lol thx for reminding me to make a dentist appt...

 

[jdsimons]

Hey the system looks good. Awesome job with the install. One thing you might be able to do that i am sure we are doing with my install i'm working on now with my LS is, building a false floor. Take out the stock one and just build one so that it can be pieced in there and taken out when you need to get to the battery or tire.

 

[Motts]

i can get the tire out its just the fact that i need to keep my amps from fallin allover the place.. I'll figure something out... who needs a spare.. hehe lol

 

[Jamler3]

i CAN STILL OPEN THE SPARE COMPARTMENT A LIL.. LOL ENOUGH TO GET THE SPARE OUT AND GET TO THE BATTERY IF I HAVE TO.... THE BOX WAS CUSTOM BUILT BY SOUNDCRAFT, AND MODIFIED A LIL BY ME, TO MAKE IT LOOK LIKE IT WAS BUILT INTO THE TRUNK.
I ALSO CUT THROUGH THE FLOOR PIECE TO MAKE THE AMPS LOOK FLUSH... i PLAN ON ADDING A PIECE OF PLEXI GLASS OVER THE TOP WITH THE LINCON EMBLEM ETCHED INTO IT FOR SHOW PURPOSES.. I THINK IT'LL LOOK SHARP BUT INORDER TO DO THIS, I'LL HAVE TO ADD A FEW FANS TO KEEP SOME AIR CIRCULATION. THE AMPS HAVE BUILT IN FANS BUT.. NOT ENOUGH TO KEEP THEM COOL... IF THEY ARE COVERED.... i WAS GOING TO DO A FIBERGLASS ENCLOSURE BUT DONT REALLY HAVE THE TIME AT THE MOMENT, AND HAVENT REALLY FIGURED OUT HOW I WILL GET MY SPARE OUT.... i'M OPEN TO IDEAS

I'd goto customcargrills.com and get some of that Diamond polished alluminum grill section and form it over that amps... Then you can Mount a cool Lincoln Star Emblem on top of that!!!... Just a thought, but I think that would look cool

 

[Motts]

hmmmm never thought of that