one piece drive shaft i will sell for 80.00

[1996mark8green]

I have a one piece drive shaft i will sell for 80.00 plus shipping or you can pic up in michigan thanks dave

also i leave friday morning for calif and will be able to drop it along the way if you are by way of denver for a 15.00 fee thanks

 

[67Continental]

is it out of a 93, or is it a custom driveshaft?

 

[1996mark8green]

repley

it is a 1993 mark viii

 

[MonsterMark]

I have a one piece drive shaft i will sell for 80.00 plus shipping or you can pic up in michigan thanks dave

also i leave friday morning for calif and will be able to drop it along the way if you are by way of denver for a 15.00 fee thanks

Do you have a pic of it . Sometimes people are confused as to the difference between the 1 pc and the 2 pc as to looks. Just asking.

 

[1996mark8green]

well

I just crawled under there and it is most definatlly a one peice looks to be alluminum and in good shape Ie iam not very happy to find out it looks like i will have to drop the gas tank to get it out uuuuhhhhgggg
no wonder they went to a 2 piece

 

[PioneerCrazed]

Just to let you know, the two piece isn't a traditional two piece driveshaft. It has like 2 driveshafts in one with our cars. In the pic where I circled it is how you can tell if its a 2 piece. The shiney driveshaft is a one piece MMX DS. You might want to check again for the break in the shaft.

 

[1996mark8green]

one piece

well went out and looked again and can see 10 inches on rear and 2 ft of front and there are most definatlly no slideing joints thanks dave

 

[Moes8]

while this topic is active,,
does a one piece like the 93's for the most part guaranteee to be vibration free,
so like,if i go and drop the tank and install a one piece 93 will i be sure( so long as the universals are tight)that it should be smooth??????


thanks