pinion angle

[MYTURN]

has anyone checked or tried changing their pinion angles like the cobra independents do? this might be helpful

 

[driller]

It's on my never-ending list of things to do.

http://home.flash.net/~ivc1/cobra/irsvibes.html

 

[brentalan]

No I have not. That might explain why I can never get rid of that annoying rear-view mirror shake!!!!!!!!!!

 

[02LSE96LSC91SE84TC]

No I have not. That might explain why I can never get rid of that annoying rear-view mirror shake!!!!!!!!!!

Stock drive shaft?

 

[brentalan]

No, mine is a denny's. I actually tried a second one because I thought perhaps the first one was not balanced well enough.

 

[02LSE96LSC91SE84TC]

No, mine is a denny's. I actually tried a second one because I thought perhaps the first one was not balanced well enough.

I figured it wasn't stock sorry for the obvious question.

Have you rotated it to see if it has a better position.

I thought his shaft was the fix.

 

[brentalan]

Haven't rotated it. I'm sure his is better, but it's not smooth as glass that's all. It could also be that I just can't get the aftermarket wheels perfectly balanced. (tried the hunter machine)

 

[02LSE96LSC91SE84TC]

Haven't rotated it. I'm sure his is better, but it's not smooth as glass that's all. It could also be that I just can't get the aftermarket wheels perfectly balanced. (tried the hunter machine)

I'd mark it and rotate it 180degrees and see if it changes, then also try the other 2 positions for the best. It makes a difference. At least before I would monkey with the pinion angle. Also if you didn't change the bushings try that.

 

[brentalan]

'k thanks for the ideas