Rear shock mounts replacements

ONEBADMK8 said:
You guys do know that you can use your old ones for free right?
Click to expand...


that is what I am doing tomorrow! You can learn a lot of tricks from reading this site ;)
 
I reused my old ones for free. Definately the way to go.
 
That is what I did and used the 97 T-Bird shocks Monroes Sensa-trac #5965 around $50.00 for the pair and they work great.:)
 
I just ordered my coil conversion from American Air Suspension (Thanks Eddie)... I'll will also change my rear shocks while I'm at it. I'm going to do the free method on the shock mounts.. T-Bird shocks all the way... Save the extra cash.
 
Ricksquickviii said:
how would i reused my old ones for free? i have looked at the ones that i have yet
Click to expand...
Take them out, remove the rubber from the mount, usually by burning it out, use the rubber bushings included with your new shocks.... it will work good as new. Many of us here have done this.
If you do a search for shock mounts you will find an old post about this with pictures.
 
RicksquickVlll, When you take out your rear shocks, take the mounts off and either cut most of the rubber off and then torch the rest of the rubber off and just reuse the metal part, pretty simple and they work just as good as the ones you pay like $40.00 for.
 
my95mark8 said:
Take them out, remove the rubber from the mount, usually by burning it out, use the rubber bushings included with your new shocks.... it will work good as new. Many of us here have done this.
If you do a search for shock mounts you will find an old post about this with pictures.
Click to expand...

Here's the thread.. http://www.lincolnvscadillac.com/showthread.php?t=20192
 
You must log in or register to reply here.

Members online

No members online now.
Total: 129 (members: 0, guests: 129)
Back
Top