TPS switch
- Thread starter 98LSC32V
- Start date
94m5
Dmaup's Daddy
not easy.
Your best bet is to pull the intake tube, and undo the throttle linkage, then pull the 4 bolts holding the TB down. Pull it off, and swap the sensor, place a new gasket on the intake and reassemble.
Prepare for some cussing, and a cramped back, and cut hands. all in allm it's not too bad
Mike
Your best bet is to pull the intake tube, and undo the throttle linkage, then pull the 4 bolts holding the TB down. Pull it off, and swap the sensor, place a new gasket on the intake and reassemble.
Prepare for some cussing, and a cramped back, and cut hands. all in allm it's not too bad
Mike