WTB-B heads

[94m5]

WTB, B Heads in any shape, running or not. As long as there are no cracks on the outside let's hear about em.


Mike

 

[m_maker]

You know I have several sets.

 

[94m5]

I really did'nt know that. How much you want for a pair?



ALSO since I have your attention............... You know anyone or where I can get a terminator intercooler? The one UNDER the sc?


Other than Ford of course.

 

[m_maker]

$100 for the pair, 96s, 97s ... take your pick.

FOrd is the only source for said intercooler.

 

[94m5]

What mileage of both years?


also,


I'm needing a set of IMRCS....Gen2 or Cobra. No composites. Got em?




I realize Ford is the only retailer for the intercooler, I was hoping that you knew of anyone who had one sitting around I could borrow (with a deposit of course) for a couple days. I need to get it measured and put into Inventor.



Thanks J.



P.S. I know you have'nt normally been too big on taking pictures of your projects but I'm HOPING you have a bunch of pics of the upper end assy of your charger projects. Please tell me you do.


Thanks a bunch friend.


Mike

 

[kustomizingkid]

I have a nasty set of heads from a 94, free if you pay shipping. The cams haave surface rust from sitting so long.

 

[94m5]

Castings in good shape? Thats all I need.

 

[kustomizingkid]

They look fine to me, just dirty. I did break one of those braces that goes on top of the cam caps, that was me being stupid that did that.

 

[94m5]

I'm not sure what shippin' is gonna be.


Any quotes to 80918?

 

[kustomizingkid]

Do you need the cams? I'm sure taking them out will save a little weight. Otherwise I will have to way them tommorow because they are at my work right now.

 

[Thomas A]

I'll have a set of aluminum Cobra IMRC's for sale shortly if you are interested.

Thomas

 

[94m5]

I'll have a set of aluminum Cobra IMRC's for sale shortly if you are interested.

Thomas

Yes I am interested, unless I can find a set before yours come availible.




Kustomizingkid

No I do NOT need the cams......Or the valves/springs.

I would prefer you left the cam bearing caps, but other than that......nothing else is needed.

 

[94m5]

Any updates on the heads? Jeremi, did you see the message about the pictures?

 

[m_maker]

Sorry, no pics of the setup.

Heads have 60k-90k miles, look new, no junk here.

 

[94m5]

Thanks J.



Kustomizing???????????????

 

[94m5]

Earth to Kustomizing kid..............................

 

[Thomas A]

I should have a set ready to go by Tuesday.

Thomas

 

[94m5]

Cool..............how much for em?

 

[Thomas A]

$100 plus shipping? I'm over here in Nebraska, so hopefully shipping won't be too bad.

Thomas

 

[BAD97LSC]

if all else fails i have a set removed from a running motor i sold the block thats why the motor came apart, they are complete in good shape. if i dont find a buyer soon i'm knocking all the steel out and cashing in the head castings for scrap. im tired of looking at them.

 

[94m5]

I'll give you a preemptive ok on your set Jaime.


What kinda $ are we looking at?

 

[BAD97LSC]

pm sent

 

[98CobraStarLSC]

if your having trouble, you could always try www.svtperformance.com/forums
Might be able to find an intercooler there too.

Good luck

 

[94m5]

if your having trouble, you could always try www.svtperformance.com/forums
Might be able to find an intercooler there too.

Good luck

I owe you a beer when ever we meet. I just bought an 03-04 Lower manifold, and intercooler for 450.




Thanks man.


Mike

 

[chicken]

I owe you a beer when ever we meet. I just bought an 03-04 Lower manifold, and intercooler for 450.

you suck!!