Hello friends,
My Continental is riding very high, evenly on all wheels (there is a big gap between the wheels and the fenders. It looks like an SUV ! ). I changed the level sensors in the back but the situation did not change. There is no check-engine light warning. The air springs in...
Lift it a little to disengage it at the window sill, and then pull away very hard. There are several push pins holding it in place after you remove the screws. They are very strong, they won't brake. Start pulling at the bottom. You may want to use a tool to locate the pins at the bottom and...
I started to remove the headliner but I realized that it is glued to the metal.
1) What is a practical way to remove it ?
2) Do I need to glue it back ? If so, What kind of adhesive should I use ?
Thank you.
I have removed all trimming and accesories from the headliner but it seems to be glued to the metal frame.
1) Does anyone know how to remove it ?
2) Do I have to insert a blade and cut the glue
3) And after that, can I remove it through a door ?
4) Do I have to glue it back upon...
I have an immaculate 2000 Continental with a burned valve (= no cylinder compression). Can the head near the front be removed without removing the engine from the bay ? How much can I expect to sell it for in that condition ?
Thank you for any advice.
This is a 32 valve engine and has 110k miles. The compression is as follows:
#1 to #4: 185 psi
#5: 130
#6: 110
#7: 130
#8: 185
Does this sound like a blown gasket ? How can I distinguish it from a valve or ring problem ?
I have always used...
I have the following problem: With engine hot, when I slow down to about 25mph and then gently accelerate while the transmission is still in O.D. (or 3th gear?), the engine starts to "missfire" or pull very "jerkily". This happens specially when going uphill. The mechanic changed sparkplugs...
The inside edge of my front tires is wearing excessively, although the dealer aligned it about a year ago. Is this a common problen on these cars, or does it just need a new alignment ? I keep the pressure at 30 psi. Thank you.
Does anybody know how to remove a front door interior panel ?. I have removed the 5 crews (two in the door handle, two at the bottom under the map pocket, and one on the side) but I still cannot remove it. Are there push pins to be removed ?. I will appreciate any hints.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.