Search results for query: LED Bulbs

The interior lights don't work at all. With the door open they don't work. The dome, door, and back seat lights don't work with switches on or not. The fuse is fine. I have tried all the auto lamp switches on the side. The bulbs aren't bad either Where should I go from here?

Yes, they are interchangeable for fit and legal function. The only difference is Gen 1 features a 168 bulb tail light in the lower section of the outer tail light in addition to the 3157 tail/brake light combo bulb. There is a minor appearance difference as well since gen 2 does not have the...

Any chance the *two 3W4Z-9E498-BA EGR vacuum connector tube assemblies, one used and one new in sealed original package* are available or possibly anything else on your list of LS goodies? Wish you the very Best. Your service to the LS community has been an honor.

Double rate blink usually indicates that one or more bulb filaments are out (or you swapped in LED bulbs). Replacing the switch won't alter this. The switch is the at the end of the turn signal lever. If you really meant the flasher, I don't know if your Navigator has a discrete flasher, or...

I know if the ballast touches anything on car it'll shut it down bc the outer shells I guess are conductive, I fixed this problem by throwing a ziplock back around the ballast and it stopped it from happening, not sure if that's your issue but its what mine was. The HID bulbs if they are...

I'm selling one of my LS's if anyone is interested. Asking $1500, which is way less than I recently put into it but I've bought a new Lincoln and this one needs a good home that someone can take the time to make it great again. it has everything, the leather has one tear in driver seat but not...

...not to be impressed and the pictures also were not impressive. I read that one guy used chrome spray paint that didn't last too long with his halogen bulbs. I have LED bulbs in mine. What product should I use for the re-chroming? I'll do my own work, just need to know what chrome product to use.

Hey, I'm new here, I bought a Mark VIII, it's quickly become the Mark Hate... It had way more issues than I thought, I'll use this to document all the fun! I got it home and did an inspection of the front end, it looked a mess... I was wrong, it was a huge mess... Finally got the...

Here is a passenger side Head light for a 2003-2006 LS. It is a Halogen light. Comes with bulbs. Passenger Side Head Light

Does that bulb work with the hazard 4-way flashers running?

Power to the front left turn signal bulb is provided by fuse F210 (5 Amp) in the Central Junction Box (CJB). The right turn signal bulb gets power from the CJB via fuse F208. And like joegr pointed out, the bulbs should have power at all times. Ground to activate the parking light or turn...

Yeah I never even thought about trying stopleak lol.. I need a diagram :p I dont want to start another thread but now my driver side front blinker dont work only the park lights up i goy multiple new bulbs and same thing i checked the FEM stuff and fuses they all good I get 11.88v on the...

I really wish you would get those LEDs out and put the correct bulbs back in. The reflectors are not meant for LEDs, and you are blinding your fellow drivers. If you look really closely on the LED packaging, it says for off-road use only. There are no DOT approved LED retro-fits. You could...

Sounds Good, I'll give her a shot

Yeah, I would guess wiring, or maybe the switch itself. (Unless, the 1st gen still used bulbs for that, then it could be the bulb.) I think that you could temporarily swap the switches and see if the problem moved to the right one, or stayed with the left one.

Thank you for the info. So, am I correct that there is no plug-and-play solution available at any cost? Not that anyone would choose to stay with stock once the cost exceeds about $100. Are there high and low beam HID bulbs in each housing (4 bulbs total for the car)? Is there a plug-and-play...

...china HID bulbs in the car but the quality of those HIDs were terrible. I updated the article with my last installment of using China 9006 LED bulbs that are by far the easiest install and they are clearl;y the brightest low beam LED's out there for an inexpensive price. Some one handy can...

...cartridge bulbs in the overhead lights. There is some evidence of them melting the plastic housing slightly and I was thinking of going to LED bulbs. Does anyone have recommendations bulbs that aren't too blue? Anything I should look at with the rear defroster grid at this time? I don't...

I promise this is the Last tweak worth mentioning to get a low beam that works similar to OEM. I found that the adapters that I made at the beginning of this article was pretty much part of the beam size problem. It was holding the bulbs out of the reflector cup too far. So I took the 9006 6...

The low beam bulb saga continues. after setting the 97 up with 4 emitter LED bulbs, I decided they just aren't up to brightness standards I was hoping for. Every time I click the basic bulb hi beam on, it blows away the LED for the dullness you see out of them. So, there was only one outfit...