Search results for query: LED Bulbs

Another update. Well, the above LED's were a tad better than the HIDs but not even close to the normal high beams. I got out my Lumin meter and checked to see what it read on the 4 emitter bulb. With relatively good condition chroming inside the housings, I was getting a max of 26-2700 in the...

...on the lighting circuits. So, the time has come to ditch the ballast HIDS for direct powered LED's. I chose the Islncer HB3/9005 fan cooled bulbs. These have a post with 4 LED's around it rather than bulbs with only 2 LEDs. The 4 are clearly brighter than the 2 only emitters. Attaching these...

LEDs have more resistance than incandescent bulbs, not less. The higher the resistance, the less current flow. Kind of the inverse of how you are thinking of it. In this case the car is seeing too much resistance and thinks the circuit is open (open circuit = infinite resistance). On the...

ok so i cant figure out what i need to do to get rid of this bulb warning message. ive got the stock bulbs, and 2 different sets of LED bulbs, i wired the resistors in exactly as it shows on here, still got the message, tried different LED bulbs, still got warning message. so i measured the...

If you search Google for f7lz13008cb RH lamp there are a few NOS listed. f7lz13008db is LH but none to be found. Assumes you still have HID for low beam. There was a long complicated history on Hid bulbs. Obsolete since early 2000s. Still available used. I may have a set of assemblies that are...

...car will stop quicker too. I think either way you'll be good. On the headlight bulbs with LED's I am currently clueless on that. Someone will chime in on that.... I had only gone through about 5 of these results, did a search real quick and came up with this: Search results for query: LED...

Thx for the good wishes on the job, so far the best job I’ve ever had! Good to know about the Powerstop brakes. Did you get upgraded rotors that are slotted and drilled? Rockauto has Powerstop z23 Evolution kits for front & rear which look good for an upgrade. On the headlight bulbs, has...

I like the Power Stop brand very much. I recommend them. Get the ceramic pads, that way it will have no squeal. One thing I recommend also for oil filters would be to go with the Motorcraft FL820S filter for this car. It has an anti drain back valve so there is oil in it upon start up...

Thx for the support. How do you like the Powersport pads & rotors? I’m getting some pulsation in the front rotors, next maintenance item will probably be brakes. I am glad I went to Aamco on Friday to check on it, it was on the lift as promised. I had not been able to look underneath before...

This all that's left?

Saleens Coils

Supercharger kit Koni rear shocks Meziere electric water pump alternator Motorcraft coils headlight assembly’s Factory Hid bulbs If you’re interested in any of the above let me know, once I put them on ebay I can’t be flexible with the prices

For the record... the fog lights on the LS... are not yellow. I said yellowish (compared to the headlights). . LOL... you obviously haven't read my location. It's at the top of every post I make. I'm right in the heart of the snowbelt/rustbelt. We don't just get snow and fog here...

...and headlight out basically, but in a Lincoln LS fog light I would opt for a cheaper one if I had the chance because they are super easy to change. Far from an expert but I have noticed that LED bulbs range from $10 to $200 and I don't see much upside with the $200 ones versus the $10 ones...

Selling a Fully custom blacked out Lincoln LS with new engine, new transmission, new Apple and Android car play system, new suspension with ball joints and spindles, new rear main seal, new retrofit headlights from 2001 with LED lights for fog lights & high & low beam bulbs as well, also new...

...would be concerned about the loss of low beam lighting in the gen 1 vs the HID's in gen 2. IIRC, the gen 1's low beams were terrible. Maybe LED bulbs could improve that, I don't know. It's one reason why I only considered the gen 2 cars when looking for one, I wound up with a 1998 mark. Still...

Instead of installing resistors that get really hot, I simply used t5 instrument cluster bulbs for each circuit, and since they don't get burning hot I tucked them in behind the trunk liner. They only pull 180ma's each, which is enough to fool the lamp out warning. I also didn't spend a lot of $...

Ya i was going to try different size resistors but wasn't sure what to get jus cuz like u said, idk what resistance the computer is looking for. I suppose i could measure the resistance of the old bulbs huh? And get something that closely matches? I'm guessing it's probably pretty close, since...

...is looking for, but your LEDs could just be affecting that. Try using higher values in the same configuration to see if that works. LED bulbs have resistors to protect them from being overdriven and blowing up so yours might have a lower resistance than the V-LEDs one did, trial and error...

...believe the prices that v LED store is charging! Like is that a joke? Theyre smoking crack if they think I'm gonna pay $180 for a set of LED bulbs. A set of LED bulbs that cost them less than a dollar to manufacture, and that I can get similar quality for 20 bucks on amazon...And if I payed...