lol i know I sound desperate here but is it possible to use the stock manifold for the s/c setup or would that just turn into a under the hood pipe bomb when it hits boost?
Im confused with this whole thing lol. Is it possible to use the intake manifold of the sc tbird on a ls and just bolt it on. without fabrication of a new manifold or do you have to fabricate one in order to use the m90 to a ls?
Is there alot of people who could fabricate this manifold? I didnt know this was a custom manifold lol. I just want to make my car faster either that or im 130 down the hole.
Hey Quik, Lol so I have this 130 dollar m90 in my room and I dont know what plenum/ intake manifold I need to get started. But I got good news I just got a job at a ford lincoln merc dealership in seattle as a tech. Learning lots of new stuff over the 4 weeks of working there. I have access to...
air bag light
My ls did it too. Your best bet is the clock spring. They tested it when my car was in a accident and they diagnosed it to that. It would go on randomly then constantly. Sometimes I could get it to stay off when i was parked when the wheel was turned to a certain position. The...
Mine is off a 90 tbird but quick ls is the real man here. Its the eaton m90 supercharger. Without him I wouldnt have this thing sitting on my livingroom floor.
Sc Ls
Hey Quik, So any luck so far on the progress of your ls? I was at the junk yard with my friend the other day and came across a 90 sc tbird. fourtunately I had 120 bucks burning a hole in my pocket. So I whiped out some tools and snagged the charger for 130. So now im in the process of...
Is there a way to open up a case for a recall? I have a town car and a ls. The town car the cruise doesnt work at all after a tranny overhaul and the ls has a bad clock spring air bag light on which happens on all of them and also my cruise control is whacky where the only way you can turn it...
Car problems
i havent had that problem on my ls yet but you should go to a auto parts store and have them plug a obd engine reader. Some places like auto zone can do that for you. Shucks did it one time but the other one I went to didnt. You just have to find one that does have the computer to...
Sc Ls
Thanks for the replys so I decided to change my oil today since when my car is cold it seems to be alot faster. Changed the oil and looking under my car I realized there is oil leaking between the engine and transmission "Rear main seal" So im guessing this is the cause of my oil leak. I...
Sc q,s
Hey Quik, Ok so I got a few more questions. First of all my whole ebay thing didnt work out so now I need to find another sc. But before I do this I need to make sure my car is healthy enough to do it. I have about 93k on the motor. I am wondering why it is burning about a quart of oil...
e85
I used to work at dodge selling e85 cars and trucks. From what the computer told me in training pure e85 will swell up fuel lines and just anhialate stuff over time. Gas has 90% gas and 10% e85 or something to that effect. Your best bet would be to just get some racing fuel and if...
Hey quick, I was wondering what kind of tranny are u using? Have u romped on it yet or are u still being cautious? My ls is giving me heck, it has this noise like a knock which I learned today is the torque converter and it is also burning or leaking oil. I had the valve covers done but I think...
Same problem with my car! I took it to about 3 people and they said it was normal. Then the shop told me it was a pully. So the torque converter is going out? I also have a oil leak and the engine somewhere. I had valve covers done but it still leaks oil like about a quart. If it is warm and in...
Its on the way....
Ok so I made my 190 dollars for the m90 eaton and sent the check and put the money in the bank so im ready to start saving more to get more if u know what I mean. I had a bad day the other night with it in the rain and spun out on 520. I saved it by throwing it in reverse and...
Rear pads rotors
If u do the back pads rotors do not set the brake. MAKE SURE IT IS STABLE AND NOT GOING TO FALL ON U WORKING ON IT. I did this myself on the rear rotors and pads. 1st remove wheel I did 1 side at a time not both at once meaning I had to lift it up on the left side do the left...
So, im interested can u help me get what I need?
Ok so I have been looking at this post for a while. I used to have a turbo car and the sounds and powers it held were something known to man as pride. Well that and my corvette both which the turbo blew a rod through the block and the vette is...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.