Search results for query: *

What kind of wrenches are you using? There is a small section of line that connects the hpl to the rack. You want to connect the hpl to that little section. You really have to watch it cause you can tweak/twist that little line while trying to seperate it. I definatly have tweeked it, where...

Ok so after fighting it for about 3 or 4 days (ive lost track and took many anger relief breaks) i feel like im leaking fluid from where the high pressure line goes into the rack, i tried to get the line off, and it wouldn't budge for anything and it also looks like there is a piece between the...

Just had to go grab the kiddo from grandparents, and its way to cold for me to get under there again tonight, ill post some pics of what im looking at tomorrow tho. i know pictures are way better than me trying to explain stuff i dont know about lol, thanks for the help guys

I think its gotta be #5 or 6, ill get back under there and look again, that pic is awsome tho. thank you, called ford and lincoln and they could find a picture for me lol. I don't think its the trans tho, well at least i hope not. but i think it was just one of the lines blowing out, i went to...

Hey guys, Im having a prob with my power steering right now, im definatly leaking fluid from somewhere but i can't find it. I looked online and they're all giving me pictures of so i guess my real question is what does the side i have circled plug into? i looked under the car and it magicly...

maybe......lol well now ill just take the whole thing off

......well now I think its a torx thing.....anyone know what size they are?

Ya, its extra exciting lol Anyone have any idea how to get a screwdriver back there? ive got a phillips bit through a wrench now and was hopeing there is some easier way......there is literally no room lol just when I thought I was over the hard part.....now these 2 tiny screws are givin me a...

So sence we all know i dono what im doing........where is the tps sensor at? i have a pic of one but i don't see it when i pop the hood

new thing i noticed. when im in park and i turn the wheels im losing 500 rpm if im trying to hold it at 1500. what does it all mean? lol im pretty sure by the end of this im going to be overly qualified to work at jiffy lube lol

I only get a check engine light when im driving for a couple hours and if the ac is on. The plugs and wires were not the original, but i went and put motorcraft back in when i did them. Ill check the fuel pressure and then see if orilley can loan me a multimeter. any good links for checking the...

Progress report. First 2 days I was so excited, the car acted like it gained 1000 hp!!!!!!!!! lol It had been acting wierd when going up hills (like not downshifting so rpm's would get low and when i give it gas the car shakes and makes horrible noises) and when shifting from first to secound or...

IT RUNS AGAIN!!!!! lol Thank all of you guys so much for the knowledge.....next project...fixing the power windows...how bad could it go? lol

Thanks. they were hooked up right on passanger side but driver side looked like this im beginning to think that the guy b4 me was even worse with cars than myself lol

Thanks again for all of your help guys. i know im not good when it comes to cars, but i don't really have anyone in my family or anything that knows anything lol so u guys are my only hope!

ok so valve cover back on....new gaskets put in....new plugs in....oil out of spark plug hole....*didn't let it drop into cylinder*........new oil in...Now im looking at a diagram to get my plug wire hooked back up and its different from how they are currently hooked up on the car. The car does...

Its like the lower picture. Im glad to hear that tho lol ive been stressing for 2 days

its a small square bit probly not even an inch long. its the one used to take the bolts off of the fuel pressure regulater. i had to take the valve cover off tho b/c one of my spark plug holes was 1/4 full of oil so i was going to put new seals on that whole side. then the bit dropped now im...

Im draining the oil now and gunna try and get the magnet up there and dump some more oil down to try to flush it out. thanks for the advice guys. how it happened tho was i couldn't get the valve cover off so i thought if i took the fuel pressure regulater off i could get the like 2mm of...

So it all started with changing the spark plugs....now ive managed to drop a bit into the holes in the bottom of the valve case thing, right under where the bottom cam is at on the passanger side. Ive been trying to fish it out with a magnet for about an hour now, where do those holes even go...