I have recently taken out the entire dash to change the heater core. I took everything out,even all the A/C hoses, all that is left are the wires and the fuse box and some stuff that was mounted to the metal bracket that was bolted to the dash. SInce I have already taken out the dash , I decided to replace it with a custom fiberglass dash.
The problem is that now with the dash completely out the battery will not keep a charge. If I jump start it, it will run fine for about fifteen min. then it will die, even if I am steady on the gas. I can not figure out what the problem is. I was thinking that some wires that were connected to the frame of the dash were grounded to it in some way, but I'm not sure. :Bang
Any help would be greatly appreciated.
Thanks,
The problem is that now with the dash completely out the battery will not keep a charge. If I jump start it, it will run fine for about fifteen min. then it will die, even if I am steady on the gas. I can not figure out what the problem is. I was thinking that some wires that were connected to the frame of the dash were grounded to it in some way, but I'm not sure. :Bang
Any help would be greatly appreciated.
Thanks,