98 Lincoln Mark VIII Brake Proportioning Valve

[slowmkviii]

No problems
I hope its smooth sailing once its in

 

[Dougviii]

I'm in colorado springs.

I have one availible, and can install it tomorrow evening.

Pm me.

 

[Dougviii]

I know this is a five-year-old post but I was hoping you could help me with some information. I have a 93 Mark 8 with a leak at the proportioning valve, I mistakenly thought I could remove the inner fender to gain access to the old proportioning valve and found that was not the case, before I remove the engine to gain access, are there any suggestions you could give me to replacing the port portioning valve on a Mark 8?

 

[BILLBOATS]

I know this is a five-year-old post but I was hoping you could help me with some information. I have a 93 Mark 8 with a leak at the proportioning valve, I mistakenly thought I could remove the inner fender to gain access to the old proportioning valve and found that was not the case, before I remove the engine to gain access, are there any suggestions you could give me to replacing the port portioning valve on a Mark 8?

Is the problem one of so little room you have to move the mill out to fix the brakes?

 

[Dougviii]

Yup it's buried, I'm going to try lowering the engine and trans without unhooking and disconnecting everything, I have it on stands and hopefully when I unbolt the K-member and upper suspension, I'll be able lower it enough to get access !

 

[Dougviii]

Were you able to get a jack under your car?