Anyone Interested In Carbon Fiber Headlight Housings?

[Black LSE]

That stuff is to be used on Civics. Sorry, but no thank you.

+1

Those look bad.

 

[Alax7]

Its probably the camera or the fact that the headlight ones are larger therefor produce more light, but his seem brighter.

Either way, it looks awsome.

Not sure which you are reffering to, but the ones in the picture I posted with the fog rings are $30 ccfl rings. Not as bright as the LED's I have in the headlights. For the fogs, I'll be getting the same LED rings, just smaller, so the brightness will match

 

[Alax7]

i'd love to have angel eye fogs and headlights, that way instead of using my fogs i could just turn those one for show

+1

Like I said above, I would get the silverish carbon fiber to match my grey/silver scheme.. Could look sweet or like crap.. Never been done on a LS so it would be unique..

I say go for it then. Be the first to have them and then we'll know for sure if they look good or not once you get them. I say buy cheap headlights off ebay and send those in, in you dont have a car to drive while your lights are gone......or you can just send the benzels to them and keep your lights

 

[DJKapeesh]

I have an extra set of headlights sign me up

 

[JMARZILLI]

 

[FASTLLS]

^
Cool.. Looks good man! Keep up the good work!

 

[FASTLLS]

Hey TDUB.. They wanted me to post this on here..

"i noticed on the post some one mentioned that they sent the lights over to us already and we lsot them please tell them that we had to ship to our carbon fiber manufacturer and they lost the units. We did our best to get this for LS guys and we still want to give it a try and to get this done"

 

[BlackLS06]

^^

Thats no excuse, as a company they were liable to take the loss and refund the customer for loss of product.

If they have an issue with their supplier, they have to take it up with them and not let it trickle back down to the end consumer.

Its like if i borrow my car to my buddy and he wrecks it. He wont be at fault, i will for letting him borrow it in the first place.

 

[FASTLLS]

Exactly what I was thinking.. Like I said earlier, I really don't want anyone to get screwed.. I was just trying to get angel eyes..

 

[Bullschmidt]

Send me your fogs, I'll install some for you . I did it to my reg fogs a while back. Sold them to someone on here but they never posted pics with them. They were only ccfl,but lookes pretty good in the day, I'm sure LED's would look sweet on there.

If we can find some LED umnitza's that will fit im down. I know on their website they have some generic rings. I just don't know what size about we would need. Do you know what size CCFL you used on the last ones?

 

[Alax7]

I'm sure they have a size for reg foglights. LSE fogs, probably not and it probably wouldn't look good mounting inside around the reflector since it's so small.Reg gen2 fogs are a decent size for the rins to be inside.

The ones I got were 80mm, they fit good but have a little room around them, so I'm pretty sure 85mm would fit perfectly. I'm not 100% sure on that, i'm like 80% sure 85mm will fit, but if not a 80mm ring would be good enough, you would just have to center it when you glue them down. I dont know what sizes umnitza makes though or the incriments they go by, but retro solutions goes by 5mm.

I actually have an extra set of gen2 fogs that I used for the projectors. I'll take the projectors out this weekend and measure to know the actual size of the hole.

 

[TDUB]

I just e-mailed them again, hopefully I'll hear back this time.

 

[FASTLLS]

You should.. they've been checking the thread..

 

[stallone 81]

You should.. they've been checking the thread..

i emailed them yesterday they never answered me

 

[FASTLLS]

I e-mailed them yesterday to tell them you tired to contact them and haven't heard back.. maybe it was all bs..

 

[TDUB]

Ok so here's the deal on this... They can do any color that you choose to have done, so if you want them to match your car you can get that as well. However, in order to go through with this they need to get at least 5 guaranteed orders. Who's interested?

 

[stallone 81]

i am

 

[Alax7]

So they are making the benzels or we have to send them in to get painted or get a carbon fiber print put on there?

 

[stallone 81]

So they are making the benzels or we have to send them in to get painted or get a carbon fiber print put on there?

they emailed me and told me to call them so thats what im gonna do but if this isnt free like they said it was going to be in the begining im gonna pass

 

[FASTLLS]

Probably not.. They seem to be on the bs side..

"free.... free.... free..." yea right..

 

[TDUB]

Probably not.. They seem to be on the bs side..

"free.... free.... free..." yea right..

It's free to whoever helps, I guess I would qualify as like I said I sent them bezels before. Whoever sends them another set can get them free as well but they need 5 people to commit to buying them before they put them on the market. To answer your question Alax I don't believe you have to send them your bezels, unless it was for a mold. I do believe however that the 2nd gen bezels are different than first gen so maybe they would like a set of those as well.

 

[FASTLLS]

I was told I would get a free set for starting the thread.. I guess.. 5 at that price will be hard to come by..

 

[TDUB]

I was told I would get a free set for starting the thread.. I guess.. 5 at that price will be hard to come by..

Yeah unless they market them on ebay or something but around here I highly doubt it.

 

[stallone 81]

whats the price ?

 

[FASTLLS]

They said projected 350-450.. and I was like whoa..