anyone running gen 2 w/cobra intake?

[the1andonlyGR81]

i wanted to know how much hood clearance you had betweeen top of intake and hood for something i want to put there. if its an inch,2 inches im golden 1" might even work, but someone use clay or crushed tinfoil something and get me a # please. thanks.

 

[97MarkJA]

You have at least 2 inches. I'd measure it for you but my hood isn't stock.

 

[DLF]

There's no where near 2 inches of clearance, it's only about 17mm on my car.

I even had to remove the stock hood pad as it was rubbing.

 

[topher5150]

The only thing that i had to do was cut that tab twoards the rear of the hood, or it will start cutting into the intake.

 

[FLM Fan]

I think when we measured.. it was just over 1/2"

 

[philly0420]

Just space the K member down an inch or so. Lulz.