More updates. Just got the mounting kit, wiring harness, and antenna for a Headunit install. I also have some of the LEDs i plan to use pulled out of storage too. The leds are going to be used for ambient lighting
I will be using a headunit i had laying around Farenheit TID-580. Below are its specs
In-dash AM/FM, DVD, CD, MP3 player with TV Tuner and Remote
Fixed display face
5.8" LCD full color display
Wireless remote control included
Blue button lighting
Power Output:
Peak: 50 watts x 4 channels
RMS: 17 watts x 4 channels
MP3 ID3 Tag Display (Title/Artist/Album)
Playback and Audio Features:
Playback of DVD, CD, CD-R, CD-RW, MP3, and MP4
NTSC/PAL Compatible
Tuner with 18FM/12AM presets
3-Band equalizer with 3 preset tone curves
30 Second electronic anti-shock mechanism
Expandability Options:
3 Sets of 2V preamp outputs (front, rear, and subwoofer) + Line Out RCAs
iPod Ready: IC-1 IPod connection cable required
Front-panel auxiliary input: mini USB input allows connection to portable media devices such as MP3 players, etc.
Rear auxiliary video input: Rear AUX input for back-up camera
Rear auxiliary input: 1 A/V auxiliary input for secondary input source
CD Changer controls
LEDS
Antenna module
Metra 70-5521 + Head unit wiring harness
Metra 95-5000s + headunit
The following QR is my car. I'm helping test a site with this code.
regarding the wiring harness. Am i correct in that the White RCA is for the factory subwoofers, the Red RCA is for the center effect channel, and both of the blue/white wires in the 8 pin need to be connected to the remote on of the headunit? (with an resistor of 1k to 1.4k ohm)