98lincmk7lsc
Dedicated LVC Member
Just checking to see if there's any interest here for these...
They're caps/plugs for the coolant crossover tube on our engines. When I built the first one, I made a post in the Mark VIII section about them, and there was some interest expressed, but that's as far as it went.
There's been a really good amount of interest on LOD, with 8 paid for so far, rather quickly.
The hex on top is cut for an 18mm wrench using a CNC mill, so it's a perfect hexagon. The rest of it is made by me on a lathe, since our CNC lathe will probably not be operational any time in the near future. I designed it with the hex on top to eliminate the poorly thought-out 1/4" square hole on the OEM caps. This way, you won't have to worry about stripping out that hole, or breaking a 1/4" ratchet off into it.
The price is $40 shipped through PayPal.
Here's some pics...
They're caps/plugs for the coolant crossover tube on our engines. When I built the first one, I made a post in the Mark VIII section about them, and there was some interest expressed, but that's as far as it went.
There's been a really good amount of interest on LOD, with 8 paid for so far, rather quickly.
The hex on top is cut for an 18mm wrench using a CNC mill, so it's a perfect hexagon. The rest of it is made by me on a lathe, since our CNC lathe will probably not be operational any time in the near future. I designed it with the hex on top to eliminate the poorly thought-out 1/4" square hole on the OEM caps. This way, you won't have to worry about stripping out that hole, or breaking a 1/4" ratchet off into it.
The price is $40 shipped through PayPal.
Here's some pics...
