Emergency blend door fix...

warrioralumni08

Dedicated LVC Member
Joined
May 29, 2011
Messages
740
Reaction score
7
Location
Oklahoma
I had heat one day, gone the next. Found the grey lever, been trying to pull the damn thing and it will not budge any at all! Idk what I am doing wrong. Does it go in an up and down motion, or left to right? Evet since I got this Gen 2, I've had almost every common problem. :/ Possibly for sale soon, along with the Gen 1, to purchase a good, to excellent condition Gen 2.
 
Heat

The grey lever turns counter clockwise for heat. I drill a 1/8 hole in the brace next to the glovebox opening and put a wire tie on it to keep it open. Works all the time. Thanx Bruce
 
It only moves a very little bit. When your car is running and you are under there with the heater going, you will feel the air turn hot. Hope this helps
 
82769d1348169504-wood-burner-idea-small-vehicle-mentalist.jpg
 
you bhave to move the black arm not the gray one. if the gray one has come disconnected like the picture above ^ then moving the gray arm wont get you heat YO
 

Members online

No members online now.
Back
Top