Exhaust Thread Size

[BigPip]

I hate to ask but unfortunately my car is about 15 miles away and it beat me up pretty good today so I can't check it myself.
I need to replace the flange bolts that connect the cat on the driver side (2 in picture) to the pipe (3). I have tried looking up the parts on ford websites but nobody shows the bolts. Any help is appreciated, Thanks!

 

[2002WRXSTi]

My last 2nd Gen had the studs on the drivers side rust and break. Tried to find if they were metric or what but, then just took my cordless to drill em out. Then put 2 bolts through the holes and put nuts on em. Simple enough and no tapping or worrying about anything else that way.

 

[Markviiiedrea]

My last 2nd Gen had the studs on the drivers side rust and break. Tried to find if they were metric or what but, then just took my cordless to drill em out. Then put 2 bolts through the holes and put nuts on em. Simple enough and no tapping or worrying about anything else that way.

Likewise, I've cut them off, drilled them out and replaced with some stainless bolts.

I believe this is what you are looking for...

Exhaust Manifold Mount Hardware - M8-1.25mm