Fiberglass

C

clincoln

LVC Member
Joined
Apr 21, 2006
Messages
17
Reaction score
0
Location
hamilton ONT CANADA
Is There Any One Out Ther Who Makes Good Fiberglass Doors And Rear Deck Lid I Live In Canada Doors And Trunks Are Like Gold Up Hear Gotta Pay Good Coin For Some Thing With A Days Work On It So Thats 2 Doors 1 Deck Lid 3 Days I Aint Got My Paint Gun Full Yet So If Icould Find Good Glass Or Race Grade Fiberglass That Would Be The Cats Ass Thanks
 
Yes There Is A Company That Makes Them For The Mark VII, But You Need To Realize That Typing Like This Makes Reading Your Posts Incredibly Annoying. MP Motorsports Has These Parts, Last Time I Checked.
 
You can buy fiberglass hood, bumpers and decklid through ebay. But I've never seen glass doors. Are you sure they exist? I wouldn't think so.

The hood and deck lids I've seen for the Mark are lift-off only. You can't bolt the hinges to them. That would be pain in the a$$ to lift off the hood everytime you want to check oil ! uGh!
 
You are making your fellow Canadians look like simpletons with your lack of typing ability. ;)
 
Awesund said:
You can buy fiberglass hood, bumpers and decklid through ebay. But I've never seen glass doors. Are you sure they exist? I wouldn't think so.

The hood and deck lids I've seen for the Mark are lift-off only. You can't bolt the hinges to them. That would be pain in the a$$ to lift off the hood everytime you want to check oil ! uGh!
Click to expand...

Doors exist, so do fenders. They make hoods and decklids that hinge, too. You cannot use the stock lifts, you need a prop rod. You don't need to pull them off, though.
 
Hey BLOW ME BUDDY
I wrench on cars not typ . You should bring your mommy MARK 8 to HAMILTON its just across the bay. I wold rather pound gears then typ. My MARK 7 is a bit faster then my typing [ RUN YOUR CAR NOT YOUR MOUTH]
 
What a maroon. Do you even own a five speed? How are you "banging" gears in a lincoln. ^^

Fiberglass parts -

The company MP motorsports went out of business a few months back and sold thier molds and pieces to another company. Since you want to be an ass you can find out that company on your own and where to get them. The fiberglass pieces are of bad craftmanship and take more work to get them to fit from what i hear. However the following pieces are available -

Door Shells
Decklid
Fenders
Both Bumpers
Stock Hood
Cowl Hood
 
So which is it? . . .

One guy says all's well. Another says the parts suck. lol..

I'd like to know, myself.
 
If you dont mind finishing off what should be finished when you get it, go for it. Personally for the money you spend in fiberglass you can add that much more to the engine, get more power and it wont make a damn difference on your weight.
 
You must log in or register to reply here.

Members online

No members online now.
Total: 327 (members: 0, guests: 327)
Back
Top