For Sale 96-98 Cobra T-trim, Front Mount, AND 8-Rib conversion

M

mustangman57

LVC Member
Joined
Oct 30, 2010
Messages
20
Reaction score
0
Location
ocala
Contact seller
it is for a 96-98 cobra but change some of the IC piping and BAM it is for a MARK VIII!! also once this sells i will have a 96-98 cobra intake up foe sale and also a bbk twin 62mm TB for sale also



i have a complete Vortech T-trim kit.

includes:
-96-98 cobra bracket
-T-trim head unit
-Coolant crossover (vortech specific)
-Godspeed front mount intercooler
-Intercooler Piping
-Procharger race blow off valve
-05+ slot style mass air meter setup as a blow through meter
-Pigtail to adapt 94-04 mass air meter wiring to the 05+ style
-Mafia mass air extender
-Reichard Racing 8-rib 3" pulley
-Full 8-rib conversion (A/C, ALT, Crank, P/S, W/P Pulley, Stock Idler, Tensioner Idler and Vortech Idler Pulley)
-Oil feed (steel braided) and Oil drain lines
-All necessary bolts, clamps, and rubber couplers

this setup is still on my car and it is my daily driver. i made 537hp to the ground with some belt slip, i had ordered an 8-rib belt but it did not come in before i went to the dyno so it was only able to make 13psi now that i have an 8-rib belt i make 15psi and it holds (NO MORE SLIP!) with a re-tune i should be making 550-575hp. with a pulley change this kit is capable of way more power. 600-700 easy depending on your setup. i am only selling because i am switching to c-heads and an eaton setup.


im asking $3500.00obo. or trade for an eaton swap

located in ocala fl.

CALLING me is the BEST way to contact me or TEXT at 352-454-8550
 
it is for a 96-98 cobra but change some of the IC piping and BAM it is for a MARK VIII!! also once this sells i will have a 96-98 cobra intake up foe sale and also a bbk twin 62mm TB for sale also

i have a complete Vortech T-trim kit.

includes:
-96-98 cobra bracket
-T-trim head unit
-Coolant crossover (vortech specific)
-Godspeed front mount intercooler
-Intercooler Piping
-Procharger race blow off valve
-05+ slot style mass air meter setup as a blow through meter
-Pigtail to adapt 94-04 mass air meter wiring to the 05+ style
-Mafia mass air extender
-Reichard Racing 8-rib 3" pulley
-Full 8-rib conversion (A/C, ALT, Crank, P/S, W/P Pulley, Stock Idler, Tensioner Idler and Vortech Idler Pulley)
-Oil feed (steel braided) and Oil drain lines
-All necessary bolts, clamps, and rubber couplers

this setup is still on my car and it is my daily driver. i made 537hp to the ground with some belt slip, i had ordered an 8-rib belt but it did not come in before i went to the dyno so it was only able to make 13psi now that i have an 8-rib belt i make 15psi and it holds (NO MORE SLIP!) with a re-tune i should be making 550-575hp. with a pulley change this kit is capable of way more power. 600-700 easy depending on your setup. i am only selling because i am switching to c-heads and an eaton setup.


im asking $3500.00obo. or trade for an eaton swap

located in ocala fl.

CALLING me is the BEST way to contact me or TEXT at 352-454-8550
 
i just recently joined this site to help me sell this stuff. i have been a member of Corral.net(3years 100% positive feedback with 13 feedback comments left Corral.net : Ford Mustang Forums) , SVTperformance.com(about 8 months also with 100% positive feedback), and Modularfords.com (about 10 months no feedback yet) i have a good record of honest transactions.
 
But you're developing a reputation as a "spammer" here.
Last warning.

Keep the sales in the "Parts For Sale" forum.
 
the car is my daily driver so i cant sell anything until i have a commitment for everything. but as soon as the blower sells my c-heads go on along with my eaton. then ill shoot you a pm...................by the way im not a spammer. i am just really trying to get this thing sold so i am trying to put it out there as much as possible. it is on 7 different forums
 
mustangman57 said:
the car is my daily driver so i cant sell anything until i have a commitment for everything. but as soon as the blower sells my c-heads go on along with my eaton. then ill shoot you a pm...................by the way im not a spammer. i am just really trying to get this thing sold so i am trying to put it out there as much as possible. it is on 7 different forums
Click to expand...

That's cool! How much do you want for the cobra intake when you do pull it off your car? Let me know when you are selling it then. Thank
 
Just let me know when you want to get rid of the intake. I will take the intake with the stock throttlebody if you still have it. Thank you
 
BUMP BUMP come on guys ill even make a package deal on the intake if you want. i just really want my eaton swap!!
 
Are you gonna sell me the intake or make it a package deal with the blower? I am interested in just the intake but if you don't want to sell it seperate then I will look elsewhere. Let me know.
 
You must log in or register to reply here.

Members online

No members online now.
Total: 148 (members: 0, guests: 148)
Back
Top