G-RELL
FULLY DIPPED LS
Hey guys, Below are a few items I've collected over the years, most were bought used and in the condition I received them (or now better). Let me know if you have any questions. Most list prices are what I paid originally. They include shipping unless it exceeds $20. All pretty firm (I know their value). and can wait for the right buyer... Combo's get deals though!!!!
Im located in Kansas city, Kansas (south end) 66062
Items:
One Piece 1st Gen Intake tube / Hite Heat shield / Cone Filter.... PENDING $100
Westwings 3 piece spoiler ..... PENDING $200.00
McLaren Grille ..... PENDING $175
M3 spoiler and LS Roof spoiler ...... PENDING $50
Jaguar Engine Cover and Strut covers...... $50
2 POD pillar gauge / Depo Racing tach & volt gauge ..... $150.00
Headrest TV's ....... $150
1st gen automatic Shift boot...... $50.00
Silver cluster overlay ... $40.00
Camber lowering bolts ...$20.00
20" Niche Game wheels and tires (80+%) Chrome .... $700.00
I'll probably move these on CL.. but will give you guys first try.
Intake tube (everything you need to install):
purchased used, finish is similar to a brushed aluminum (was chrome new). A few blemishes, but a solid tube and no cracks. Includes MAF sensor / filter adaptor / throttle body connector / Hite heat shield and a used cone filter (silver)... I will clean and oil for use.
Westwings Spoiler
Purchased used, fould it locally but newer had a chance to install (waiting for new dip project)
Painted in one of the 1st gen silver colors. a few light scratches but 8/10 overall. no chips or damage. can still be found new (unpainted) online:
https://www.amazon.com/Wings-West-8...&sr=8-1&keywords=westwings+spoiler+lincoln+ls
McLaren Grille
Purchased used (made a few repairs)
All tabs good, all damage fixed and unnoticeable (repair work in my build thread). Same 1st silver paint it seems. grille portion painted black. Cobra snake decal added (scratch on decal in center)
M3 lip spoiler and roof spoiler
Both were new.
M3 was painted Light Parchment Gold, but currently Plastidipped white (will leave for shipping care) corner peeled to show paint. (looks wavy in picture, but will install flat!!!)
Roof spoiler is some sort of poly blend, I wrapped it in vinyl when installed. Would need to be painted or wrapped for install. (looks wavy in picture, will also install flat!!!)
Jaguar engine cover
came of a 1st gen s type 4.0 engine cover. was a one off project. I plastidipped it and thats what you see peeling. It would appear perfect if painted. Build also in my thread. I istalled it with ONE factory tab holding down, stayed center, no issues.
A Pillar gauge pods (Gauges included)
Purchased VERY used. has two minor cracks, but are hidden behind trim when installed. will work just fine as is, a little tlc an paint would make it mint
Gauges are used 52mm Depo Racing gauges. 7 color ... top is a 12v gauge, the other is a tachmeter (to get tach to read will need a separate adaptor)
http://www.ebay.com/itm/DEPO-racing...ash=item46021ddb73:g:UVUAAOSwv1RUZNTR&vxp=mtr
7" monitor headrests
Purchased used and worked perfect everyday. Will mirror any display from a headunit. (original owner let me know one display has a loose wire... when the power box (wire) is secured, it works fine... never failed on me once). Each headrest has covers to "hide" screens if wanted. (all wiring needed included).
1st gen leather shift boot (one off)
Bought new, easily installed. greatly cleans up shifter area. in perfect shape!
1st Gen gauge cluster overlay kit.
Purchased new, never installed (bought for a project never completed)
http://www.ebay.com/itm/FREE-SHIP-S...m3f5cc61f8a:m:m_8PHxDIg8gmO7ObK4bL2Rw&vxp=mtr
Alignment lowering kit Camber / caster (K80061)
Needed if you lower (past 2" i believe) to help correct allignment. (new, never used)
https://www.amazon.com/Moog-K80061-Cam-Bolt-Kit/dp/B000C55ZJY
I also have my 20" Niche Game 5x108 rims for sale (local pickup only...but arrangements can be made) Tires are 80% ish (one the road less then a year)
Here are them dipped, but currently peeled and back to chrome. One has very minor curb rash.. and one was knocked over in driveway (thanks wifey!!!) Pics to come soon of current state
PM me on any interest... Paypal or Cash for anything...
Im located in Kansas city, Kansas (south end) 66062
Items:
One Piece 1st Gen Intake tube / Hite Heat shield / Cone Filter.... PENDING $100
Westwings 3 piece spoiler ..... PENDING $200.00
McLaren Grille ..... PENDING $175
M3 spoiler and LS Roof spoiler ...... PENDING $50
Jaguar Engine Cover and Strut covers...... $50
2 POD pillar gauge / Depo Racing tach & volt gauge ..... $150.00
Headrest TV's ....... $150
1st gen automatic Shift boot...... $50.00
Silver cluster overlay ... $40.00
Camber lowering bolts ...$20.00
20" Niche Game wheels and tires (80+%) Chrome .... $700.00
I'll probably move these on CL.. but will give you guys first try.
Intake tube (everything you need to install):
purchased used, finish is similar to a brushed aluminum (was chrome new). A few blemishes, but a solid tube and no cracks. Includes MAF sensor / filter adaptor / throttle body connector / Hite heat shield and a used cone filter (silver)... I will clean and oil for use.
Westwings Spoiler
Purchased used, fould it locally but newer had a chance to install (waiting for new dip project)
Painted in one of the 1st gen silver colors. a few light scratches but 8/10 overall. no chips or damage. can still be found new (unpainted) online:
https://www.amazon.com/Wings-West-8...&sr=8-1&keywords=westwings+spoiler+lincoln+ls
McLaren Grille
Purchased used (made a few repairs)
All tabs good, all damage fixed and unnoticeable (repair work in my build thread). Same 1st silver paint it seems. grille portion painted black. Cobra snake decal added (scratch on decal in center)
M3 lip spoiler and roof spoiler
Both were new.
M3 was painted Light Parchment Gold, but currently Plastidipped white (will leave for shipping care) corner peeled to show paint. (looks wavy in picture, but will install flat!!!)
Roof spoiler is some sort of poly blend, I wrapped it in vinyl when installed. Would need to be painted or wrapped for install. (looks wavy in picture, will also install flat!!!)
Jaguar engine cover
came of a 1st gen s type 4.0 engine cover. was a one off project. I plastidipped it and thats what you see peeling. It would appear perfect if painted. Build also in my thread. I istalled it with ONE factory tab holding down, stayed center, no issues.
A Pillar gauge pods (Gauges included)
Purchased VERY used. has two minor cracks, but are hidden behind trim when installed. will work just fine as is, a little tlc an paint would make it mint
Gauges are used 52mm Depo Racing gauges. 7 color ... top is a 12v gauge, the other is a tachmeter (to get tach to read will need a separate adaptor)
http://www.ebay.com/itm/DEPO-racing...ash=item46021ddb73:g:UVUAAOSwv1RUZNTR&vxp=mtr
7" monitor headrests
Purchased used and worked perfect everyday. Will mirror any display from a headunit. (original owner let me know one display has a loose wire... when the power box (wire) is secured, it works fine... never failed on me once). Each headrest has covers to "hide" screens if wanted. (all wiring needed included).
1st gen leather shift boot (one off)
Bought new, easily installed. greatly cleans up shifter area. in perfect shape!
1st Gen gauge cluster overlay kit.
Purchased new, never installed (bought for a project never completed)
http://www.ebay.com/itm/FREE-SHIP-S...m3f5cc61f8a:m:m_8PHxDIg8gmO7ObK4bL2Rw&vxp=mtr
Alignment lowering kit Camber / caster (K80061)
Needed if you lower (past 2" i believe) to help correct allignment. (new, never used)
https://www.amazon.com/Moog-K80061-Cam-Bolt-Kit/dp/B000C55ZJY
I also have my 20" Niche Game 5x108 rims for sale (local pickup only...but arrangements can be made) Tires are 80% ish (one the road less then a year)
Here are them dipped, but currently peeled and back to chrome. One has very minor curb rash.. and one was knocked over in driveway (thanks wifey!!!) Pics to come soon of current state
PM me on any interest... Paypal or Cash for anything...
Last edited:
