Help with Building ls v8 engine

[mOoToO]

Hello every one

I have a v8 3.9 block and all the internal crank cam heads peston's

the only thing i didn't find is the bearing and rings

any ide where i can find them

 

[BlackLS06]

England.

 

[mOoToO]

England.

thank u

but its well cost more then buying a used engine

i only fund the bearing for s-type in the Racing green http://www.thejaguarshop.com/Jaguar/Parts_details/RG%20MBJ%20STD/c|/S-Type%201999%20onwards.htm

 

[1LoudLS]

try rock auto, ddin't see bearings (didnt look that hard) but i did see rings.

 

[Kumba]

I believe the bearings from a 4.0L Jag AJ motor are the same. You would need to mic the crank journals and compare against the Jag motor.

 

[marcredd]

If what you have is able to be remanufactured, call JMS Racing Engines in El Monte California. Ask for Mike Johnson(owner). Number is 626-579-4567. They do crazy good work and do everything in house. Just bought a remanufactured block they did and had them do my heads and valves. Tell him Marc Redd on the LS engine they just did referred you.

 

[joegr]

If what you have is able to be remanufactured, call JMS Racing Engines in El Monte California. Ask for Mike Johnson(owner). Number is 626-579-4567. They do crazy good work and do everything in house. Just bought a remanufactured block they did and had them do my heads and valves. Tell him Marc Redd on the LS engine they just did referred you.

I think that the OP lives in Sri Lanka. Clearly, English isn't his/her native language.

 

[marcredd]

At this point, I think he should be happy for whatever help he can get. LOL

 

[cammerfe]

IF YOU WANT STANDARD-SIZE BEARINGS, call 800 900 2826. Bearings for cranks that have been turned are not available anywhere. They're simply not made.

KS

 

[mOoToO]

Ok so i should call him and see what he can do

thanks for the help though

I'll post any prograss in this matter