Kale Mod???

[96mustangV6]

Ive been waiting to do this to my navigator. But ive searched and searched. All i can find is people sayin they done it and what it does.

Is there a walk through anywhere so i can convert it over to the navigator. Id imagin the air ride is set up the same. I just cant find a walk through any where on whats needed and what wires need cut/spliced into.

Thank you.

 

[NoLimit95]

[url]http://lmgtfy.com/?q=How+to+do+a+Kale+Mod[/URL]

 

[96mustangV6]

Ive searched google and forums. Even what u posted dosnt show a how too. All it leads to is people sayin what it does and people havin problems. Im tryin to find what wires they are tappin into. Hopefully a diagram would be awsome.

 

[NoLimit95]

There used to be a link to it and everything needed but there wasn't much interest with that modification. The link is now a dead one. What exactly would you like for your Navigator to do? I'm more than sure there are other things out by now that are far better and reliable than the Kale Mod from back in 2004 or earlier.

 

[96mustangV6]

Yea that was my main problem. I could find tons about it. But not how its done.

Im just wanting to lower it when i want. I dont wanna do sensor lowering as i do live on gravel road and pull a boat every so often. I wanna maintain stock height but be able to slam it while oarked or maybe driving.

Ive searched and cant find anyone thats done it to a navigatot.

Ive delt with bags on mini trucks but nit the stock system. But i am capable if wiring and solderin. I dont need to do all 4 corners. But front and back would be nice.

 

[96mustangV6]

I think i got it.

I wire a switch inbetween the air ride power wire. So i can shut the computer off? And then a wire from the battery with a fuse to 4 switches. Then from each switch to the solenoid wires to open them up.

What about turning compressor on to raise it up. Also to i need one to the vent solenoid?

I found some wire diagrams but not very mainy.

Sry it seems no ones done this to a navi and seems you guys are mist knowligable on this.

Here are some of the wire diagrams i found.

http://www.justanswer.com/view_imag...om/uploads/fordguy4u/2012-04-27_145005_a1.jpg

http://www.justanswer.com/view_imag...om/uploads/fordguy4u/2012-04-27_145026_a2.jpg

http://www.justanswer.com/view_imag...om/uploads/fordguy4u/2012-04-27_145044_a3.jpg

 

[chris2523]

I think i got it.

I wire a switch inbetween the air ride power wire. So i can shut the computer off? And then a wire from the battery with a fuse to 4 switches. Then from each switch to the solenoid wires to open them up.

What about turning compressor on to raise it up. Also to i need one to the vent solenoid?

well that's how i did it on my mark. just manually apply power to the vent solenoid and each bag solenoid. i guess Navi's are similar, but i don't really know.

 

[96mustangV6]

Thats what i was thinkin. Looks like its wired the same. What do i do with the compressor. Is there a way i can turn the air ride computer off and still control the compressor that way i can rause it so when i turn computer on it dosnt trip the computer sayin sensors are to low. What wires would i tap into on those diagram. Its showin 3 solenoids for the front.

Thanks for helpin.

 

[Epwillis]

[url]http://lmgtfy.com/?q=How+to+do+a+Kale+Mod[/URL]

I see what you did der

 

[96mustangV6]

I see what you did der

I did to. But then it didnt work Wasnt what i was searchin for.