Bill Hodson
New LVC Member
the tranny cooler tubes / lines connect at the transmission with a flared metal fitting. I have a bad leak coming from the lower tube. I removed the insert that goes into the transmission case and tried to clean it up a little. But I can’t remove the cooler lines without taking the lower subframe off.
The fitting to the case has an o-ring and I replaced that so I know the leak is at the flared fitting.
Has anyone run into this snag? I want to repair that flared fitting or somehow otherwise stop that leak.
The fitting to the case has an o-ring and I replaced that so I know the leak is at the flared fitting.
Has anyone run into this snag? I want to repair that flared fitting or somehow otherwise stop that leak.