lincolnboy
Dedicated LVC Member
cutting the cutouts on the bumper would not look bad...alot of the tbird guys have done it and a few mark's have it.....
New LMS exhaust!
- Thread starter TheBigRedOne
- Start date
67Continental
Dedicated LVC Member
i have downward pointing tips on mine, i like that look.
TheBigRedOne
Well-Known LVC Member
PioneerCrazed said:
Sorry, I thought I put that on there. I have the double XX-pipe and 2 1/2 pipe throughout with true duals. I took that picture of the QX4 system to the shop as a guide.
TheBigRedOne
Well-Known LVC Member
lincolnboy said:
How do you fill in the hole so you can't see the bumper reinforcement up in there?
ONEBADMK8
Dedicated LVC Member
You will not see anyting at all. The 94.5-96's have it, you cannot see anything on them.
TheBigRedOne
Well-Known LVC Member
ONEBADMK8 said:
If you cut the bumper you will have a hole. The 94.5-96's have plastic in the cutout that is molded curved upward to fill the hole.
PioneerCrazed
Well-Known LVC Member
What do you consider a 94.5, cause mine was made in 6/94 and does not have the cut outs... :{
ONEBADMK8
Dedicated LVC Member
94PumiceMkVIII said:
Cut the plastic too. Any body shop can perform this.
ONEBADMK8
Dedicated LVC Member
PioneerCrazed said:
Typically 94.5 through 96 have the cutouts. My Uncle Ray's green 94 was also built in 6/94 ad has the cutouts. It was a mid year thing.
CobraConti
Well-Known LVC Member
what size rims are those? Very nice Mark. The only other thing i could say for the exterior is paint the chrome trim.
TheBigRedOne
Well-Known LVC Member
KB ZILLA said:
That's great! Sounds like a good deal. Welcome to the club!
Markviiiedrea
Speed Bump
Mine was built in august 1993 and I do not have the cut outs, is there any one here who can read VIN's and tell me what # mine is for the model year of 94?
67Continental
Dedicated LVC Member
i'm a 94 without cutouts as well.