Larry85326
Active LVC Member
So today I fixed my valve cover leak. When I pulled the cover off for the COP I noticed some oil in the bottom of the valve cover. I didnt worry to much but when I pulled the first COP I seen a little oil on the rubber once i looked down the holeI see its full of oil. I pulled the other 3 and each of them had oil in them. This is on my 2001 3.9 on the passanger side of the car. when pulled the cover off the drivers side there was no oil.How or why is this and how can i make it so it dont dont do it any longer.I replaced all the gaskets in my kit all the little O rings and put RTV at the front cover where its required.Well today i have no oil leak that makes me happy butI still worry about it leaking in to my plug holes and fouling out the plug