Pics of my 20inch black bullets on 2 gen
- Thread starter tolincoln
- Start date
m_maker
Dedicated LVC Member
LI LSC 98
LVC Member
looks awesome. did you do a compelte mustang hub swap?
ONEBADMK8
Dedicated LVC Member
Damn Hottttt!!!!!!!!!!!!!!!!!!!!!!!
LI LSC 98
LVC Member
you've inspired me. i've been thinking about bullitts lately, a nice set of chrome 18's with deep dish on the rear wheels on my silver frost LSC. gotta love bullitts on these cars, adds a real muscle element to the look of the mark VIII
k9t8m
Rollin' Twankies
WOW! Those look awesome.
NYC LS8
Dedicated LVC Member
That rocks, dude 
kustomizingkid
Dedicated LVC Member
Wow!!! That car is hot!
slowmkviii
Dedicated LVC Member
looks good. to big for my taste
ONEBADMK8
Dedicated LVC Member
Now you need the CobraStar wheel centers.
02LSE96LSC91SE84TC
Dedicated LVC Member
Very sharp.
MonsterMark
Dedicated LVC Member
Nice wheels but I pitty the 1st pothole.
I hit some potholes yesterday on I-43 that would have taken out my wheels had I been driving the black '98 with the 18's on it.
Thankfully I was driving the white '98 with the factory 16" OctaStars. I hit two holes in the fog that would have taken out a wheel lip for sure.
I like my deep dish 18's, though I looking for bigger rotors/calipers for the rear. Even the cobra hubs/rotors/calipers are too damn small.
I saw a BMW today with giant rotors front and rear that looked absolutely beautiful. The rears were the same size as the front and filled, I mean filled, the whole inside of the wheels.
I am on the hunt for the biggest set I can find that will work on a mustang hub setup if anybody can lead me by the nose.
I hit some potholes yesterday on I-43 that would have taken out my wheels had I been driving the black '98 with the 18's on it.
Thankfully I was driving the white '98 with the factory 16" OctaStars. I hit two holes in the fog that would have taken out a wheel lip for sure.
I like my deep dish 18's, though I looking for bigger rotors/calipers for the rear. Even the cobra hubs/rotors/calipers are too damn small.
I saw a BMW today with giant rotors front and rear that looked absolutely beautiful. The rears were the same size as the front and filled, I mean filled, the whole inside of the wheels.
I am on the hunt for the biggest set I can find that will work on a mustang hub setup if anybody can lead me by the nose.
m_maker
Dedicated LVC Member
The specs on those wheels are:
front 20x8.5 36mm offset 245/35/20 tires
rear 20x10 45mm offset 275/30/20 tires
This is by far the best looking setup on a black 2nd gen. All it needs is a whipple to complement the look Props to you !
front 20x8.5 36mm offset 245/35/20 tires
rear 20x10 45mm offset 275/30/20 tires
This is by far the best looking setup on a black 2nd gen. All it needs is a whipple to complement the look
Props to you !
MonsterMark
Dedicated LVC Member
I'd still like to see a ground level side profile shot of the car.
Cobramarkviii
Active LVC Member
Nice I like the Black on Black... Can't wait for Winter to be over already.. need to get the Mark back out and start working on it, sometimes I just go out to the garage and sit in it and start it up just to hear the Exhaust from LMS DAMN SNOW....
lscmkviii
Dedicated LVC Member
I like it! Makes me miss my 20s...